Update app.py

app.py

@@ -1,39 +1,47 @@
+# app.py
 import streamlit as st
-import random
-
-# Simulated Gas Sensor Data (You can replace this with real sensor integration)
-def get_gas_data():
-    gas_data = {
-        "CO2 (Carbon Dioxide)": random.uniform(300, 500),  # in ppm
-        "O2 (Oxygen)": random.uniform(19, 21),             # in %
-        "N2 (Nitrogen)": random.uniform(78, 80),           # in %
-        "CFC (Chlorofluorocarbons)": random.uniform(0, 0.5), # in ppm
-        "CO (Carbon Monoxide)": random.uniform(0, 10),     # in ppm
-        "SO2 (Sulfur Dioxide)": random.uniform(0, 5),      # in ppm
-        "NO (Nitric Oxide)": random.uniform(0, 5),         # in ppm
+
+def adjust_ratios(components):
+    """Adjusts the ratio of each component."""
+    st.write("### Adjust Air Mixture Components")
+    adjusted_components = {}
+    for component, value in components.items():
+        adjusted_value = st.slider(
+            label=f"{component} Ratio (%)", min_value=0, max_value=100, value=int(value)
+        )
+        adjusted_components[component] = adjusted_value
+    return adjusted_components
+
+def main():
+    st.title("Air Mixture Adjustment App")
+    st.write("This app allows you to sense and adjust the ratio of each component in an air mixture.")
+
+    # Simulate sensing air mixture (replace with actual sensing functionality if available)
+    st.write("### Sensed Air Components")
+    sensed_components = {
+        "Nitrogen": 78,
+        "Oxygen": 21,
+        "Carbon Dioxide": 0.04,
+        "Argon": 0.93
     }
-    return gas_data
-
-# Streamlit App Layout
-st.title("Gas Mixture Sensor")
-st.write("This app simulates a sensor that detects the mixture of gases in the surrounding air.")
-
-st.header("Detected Gas Levels")
-gas_data = get_gas_data()
-for gas, value in gas_data.items():
-    if gas in ["O2 (Oxygen)", "N2 (Nitrogen)"]:
-        unit = "%"
-    else:
-        unit = "ppm"
-    st.metric(label=gas, value=f"{value:.2f} {unit}")
-
-st.sidebar.header("Settings")
-st.sidebar.write("Adjust the simulation parameters below.")
-refresh_rate = st.sidebar.slider("Refresh Rate (seconds)", 1, 10, 5)
-
-st.sidebar.write("Note: Values are simulated and change on every refresh.")
-st.sidebar.caption("This app is for demonstration purposes only.")
-
-# Auto-refresh the app based on the slider value
-st.experimental_set_query_params(refresh_rate=refresh_rate)
-st.stop()  # Prevents an infinite loop of refresh
+
+    # Display sensed components
+    for component, value in sensed_components.items():
+        st.write(f"{component}: {value}%")
+
+    # Adjust components
+    adjusted_components = adjust_ratios(sensed_components)
+
+    # Ensure the sum of the components is 100%
+    total = sum(adjusted_components.values())
+    if total != 100:
+        st.warning("The total percentage does not equal 100%. Please adjust the values.")
+
+    # Display adjusted components
+    st.write("### Final Adjusted Components")
+    for component, value in adjusted_components.items():
+        st.write(f"{component}: {value}%")
+
+if __name__ == "__main__":
+    main()
+