Daily Papers

AI agents rely on a harness of skills, tools, and workflows to solve complex problems. Continually improving this harness is essential for adapting to new tasks. However, existing optimization methods typically require ground-truth validation sets, yet such labeled data is difficult to acquire in practical deployment settings. To address this problem, we introduce Retrospective Harness Optimization (RHO), a self-supervised method that optimizes the agent harness using only past trajectories. Specifically, RHO selects a diverse coreset of challenging tasks from past trajectories and re-solves them in parallel. The agent analyzes these rollouts using self-validation and self-consistency, then generates candidate harness updates and selects the most effective one by its own pairwise self-preference. We evaluate RHO across three diverse domains, spanning software engineering, technical work, and knowledge work. Notably, a single optimization round improves the pass rate on SWE-Bench Pro from 59% to 78% without any external grading. Furthermore, our analysis demonstrates that RHO effectively targets prior failure modes. As a result, the optimized harness alters the agent's behavior patterns and sustains higher accuracy during long-horizon sessions.

Harness optimization enables automated agent creation by having an optimizer agent iteratively update the harness of target agents. Despite its success, current studies evaluate optimizers solely by observing target agents' performance gains. This indirect end-improvement evaluation neglects optimizers' actions at intermediate steps, which are often erroneous and hinder agent performance. Therefore, it is unclear whether harness optimization is driven by optimizers' informed update actions or simply trial-and-error. This necessitates direct evaluation of harness optimizers. However, evaluating harness optimizers directly is non-trivial and costly due to the lack of oracle harnesses. To address this, we present a simple, low-cost design to directly evaluate them, namely priority ranking. By asking harness optimizers to rank components (e.g., tools) in a given harness by their potential to improve/hinder agent performance when updated, our design quantifies optimizer ability at the step level without expensive rollouts or manual examination. More importantly, optimizers' ranking performance correlates with their ability to improve agents in actual multi-step harness optimization, establishing priority ranking as a reliable predictor of optimization ability. Priority ranking is enabled by Shor, a collection of 182 human-verified optimization scenarios spanning across domains, designs, and time stages. Codes and data can be found at https://github.com/k59118/Harness_Optimizer_Evaluation.

Long-horizon language-model agents are dominated, in lines of code and in operational complexity, not by their underlying model but by the harness that wraps it: context compaction, tool caching, semantic memory, trajectory reuse, speculative tool prediction, and the glue that binds the model to a sandboxed execution environment. We argue that harness design is a first-class machine-learning problem and that automated configuration search dominates manual stacking once the flag space exceeds a handful of bits. We defend this claim in two steps. First, we formalize automated harness optimization as constrained noisy Bayesian optimization over a mixed-variable, cost-heterogeneous configuration space with cold-start-corrected rewards and a posterior chance-constrained safety check, and give a reference solver, HARBOR (Harness Axis-aligned Regularized Bayesian Optimization Routine), built from a block-additive SAAS surrogate, multi-fidelity cost-aware acquisition, and TuRBO trust regions. Second, we instantiate the problem in a flag-gated harness over a production coding agent and report a controlled four-round manual-tuning case study against a fixed task suite and an end-to-end HARBOR run. The formulation itself is task-class agnostic: the configuration space, reward correction, acquisition, and safety check apply to any agent harness with a bounded flag space and a reproducible task suite.

Under model--harness co-evolution, harnesses are not merely inference-time scaffolds but data-generating components whose execution traces can shape future foundation models. This motivates harness-in-the-loop learning: optimizing harnesses for both immediate agent performance and the quality of traces used for future model training. However, continually updating provider-built scaffolds is costly and labor-intensive. We therefore investigate whether optimizing user-constructed harnesses in a task-specific manner can improve execution-trace quality while remaining computationally lightweight and requiring only a few update iterations. To this end, we introduce Recursive Harness Self-Improvement (RHI), which represents the harness as a prompt-level specification of the agent loop and iteratively refines it using pairwise feedback over its own revision history. Across 30 synthetic machine-learning research tasks spanning quantitative finance, robotics, and pharmacy, a few RHI iterations suffice to substantially raise the performance ceiling of low-reasoning-effort agents, exceeding the corresponding maximum-reasoning-effort setting while reducing inference cost by up to 60%. We show that these gains arise primarily from improved task-specific context management through more effective inter-agent information flow rather than longer reasoning traces. Finally, we formalize this behavior as an information-theoretic hypothesis for RHI's implicit optimization objective, suggesting RHI as a practical algorithm for continual learning within the paradigm of model--harness co-evolution.

An agent harness is the external control layer that turns a base LLM into an executable agent by managing context, tools, orchestration, memory, decoding, and output handling. While harness design strongly affects agent behavior, most automatic improvement methods optimize narrower artifacts such as prompts, pipelines, or workflows, and deployed agents usually reuse a single global harness for all cases. We introduce MemoHarness, an adaptive harness optimization framework that learns from its own executions. MemoHarness decomposes the harness into six editable control dimensions, stores per-case diagnoses and distilled global patterns in a dual-layer experience bank, and adapts the learned harness to each test case using retrieved experience without test-time labels, feedback, or additional search. In our evaluation across shell-agent, code-generation, and analytical-reasoning benchmarks, MemoHarness improves over the fixed harnesses we compare against and shows selective transfer to unseen suites and base models. Its additional context can also remain cost-competitive when much of the retrieved experience is cacheable. These results provide evidence that execution experience is a practical substrate for building agent harnesses that are more adaptive than a single static configuration, while leaving broader claims about statistical robustness and component attribution to future work.

We revisit the evaluation of automatic harness evolution for LLM agents. Existing harness evolution methods use unit test cases to search for harness configurations and then report final performance on the same public benchmark. This protocol raises two fundamental concerns. First, harness evolution is itself an iterative search procedure that repeatedly evaluates and revises candidate harnesses using task feedback. As in agentic test-time scaling, it should therefore be compared with simple task-level search baselines under matched feedback and inference budgets to determine whether its gains arise from improved harness design or from additional search alone. Second, because the search and the final evaluation share the same benchmark, the reported gains risk overfitting to that specific task set. To address these concerns, we conduct an extensive evaluation comparing harness evolution with simple test-time scaling and discovery baselines under comparable feedback and inference budgets, and also evaluate evolved harnesses on held-out tasks to assess whether the discovered improvements generalize. Experiments on Terminal-Bench 2.1 with GPT-5.4 and Claude Opus 4.6 show that automatic harness evolution does not consistently outperform simple test-time scaling methods and exhibits limited generalization. Our results raise important questions about the effectiveness of automatic harness evolution and highlight the need for fairer evaluation protocols and benchmarks for automatic harness design. Our code is available at https://github.com/rethinking-harness-evolution.

Auto-harness systems such as A-Evolve, GEPA, and Meta-Harness improve LLM agents by optimizing prompts, skills, tools, memories, and supporting infrastructure from execution feedback, but they are typically evaluated on fixed offline benchmarks. Real deployments instead present open-ended task streams: histories grow without a fixed endpoint, heterogeneous tasks require different harnesses, and problem distributions shift over time. These challenges make a single repeatedly and densely updated harness brittle, causing performance degradation as accuracy peaks early and then declines. This motivates sustained harness construction with task-wise adaptation. We introduce Adaptive Auto-Harness, a framework and system for such streams. The framework decomposes the gap to an oracle harness into evolution loss and adaptation loss. The system addresses these losses with a stateful multi-agent evolver, a harness tree with solve-time routing, and human-steering hooks for cases where history lacks the needed signal. Across prediction-market, security-competition, and event-forecasting streams, Adaptive Auto-Harness outperforms five existing auto-harness baselines and ablations attribute gains to better construction, routing, or targeted human steering. Code is available in https://github.com/A-EVO-Lab/AdaptiveHarness .

The performance of large language model (LLM) systems depends not only on model weights, but also on their harness: the code that determines what information to store, retrieve, and present to the model. Yet harnesses are still designed largely by hand, and existing text optimizers are poorly matched to this setting because they compress feedback too aggressively. We introduce Meta-Harness, an outer-loop system that searches over harness code for LLM applications. It uses an agentic proposer that accesses the source code, scores, and execution traces of all prior candidates through a filesystem. On online text classification, Meta-Harness improves over a state-of-the-art context management system by 7.7 points while using 4x fewer context tokens. On retrieval-augmented math reasoning, a single discovered harness improves accuracy on 200 IMO-level problems by 4.7 points on average across five held-out models. On agentic coding, discovered harnesses surpass the best hand-engineered baselines on TerminalBench-2. Together, these results show that richer access to prior experience can enable automated harness engineering.

The behavior of an LLM agent is determined not only by the underlying model, but also by its harness: the executable program that constructs context, invokes tools, verifies intermediate results, and recovers from failures. Existing approaches optimize such harnesses before deployment, searching training or development data for a fixed agent workflow that is then frozen at test time. This limits adaptation when the test distribution, failure modes, or tool interactions differ from those seen during development. We ask whether the harness can instead be optimized during evaluation itself, using only the unlabeled execution traces the agent produces on the test inputs. We introduce Test-Time Harness Evolution (TTHE), which treats the executable harness as the state of test-time adaptation. During evaluation, TTHE maintains a population of candidate harnesses and refines them through an agentic proposer that reasons over their execution traces, without gold labels or task-specific supervision; a judge then commits an improved harness from execution-derived proxy signals, and the selected program persists to govern subsequent inputs. Crucially, TTHE does not update model weights, require gold labels, or train a separate adaptation model: solver, proposers, and judge are different roles and harnesses around the same frozen LLM, so all adaptation occurs through changes to the surrounding program. Across text-to-SQL, competitive programming, software engineering, data-science coding, and agentic tool-use tasks, TTHE improves fixed ReAct-style baseline harnesses, yielding persistent, inspectable improvements rather than a pre-searched workflow or per-query retries. These results recast test-time adaptation for LLM agents as evolution over executable control programs and identify execution-derived proxy reliability as a central challenge for robust unsupervised agent improvement.

Autonomous discovery systems such as OpenEvolve and TTT-Discover are often used as general-purpose harnesses. However, in practice these are composite systems combining several design choices about archives, parent selection, exploration, and budget allocation into a single recipe. Because discovery runs are expensive and inherently stochastic, existing harnesses are often compared using too few independent trials to distinguish key methodological improvements from run-to-run variance. We systematically decompose OpenEvolve-style evolutionary search and the TTT-Discover search harness into its constituent components and systematically evaluate 30 budget-matched harnesses across 12 model-problem pairs using more than 3.1 million LLM rollouts and repeated-trial statistical analysis. Our results show that discovery harnesses have a generalization problem: No fixed harness is reliably superior across the evaluated model-problem pairs, and variants of OpenEvolve generally underperform simpler alternatives. Thus, harness choice is better viewed as a hyperparameter rather than as a universal recipe, and should be tailored to the specific problem and underlying model. We also find that early discovery progress predicts final performance, and use this property to present a budget-matched adaptive-allocation experiment that starts multiple harnesses, prunes weak partial runs, and reallocates compute to stronger survivors, outperforming both commitment to a randomly sampled fixed harness and a non-adaptive harness ensemble. Together, these results motivate shifting from fixed harness selection to online adaptation guided by early performance. We release all run pools including baseline null distributions for every model-problem pair as reusable statistical infrastructure against for future harness proposals.

The assessment of safety performance plays a pivotal role in the development and deployment of connected and automated vehicles (CAVs). A common approach involves designing testing scenarios based on prior knowledge of CAVs (e.g., surrogate models), conducting tests in these scenarios, and subsequently evaluating CAVs' safety performances. However, substantial differences between CAVs and the prior knowledge can significantly diminish the evaluation efficiency. In response to this issue, existing studies predominantly concentrate on the adaptive design of testing scenarios during the CAV testing process. Yet, these methods have limitations in their applicability to high-dimensional scenarios. To overcome this challenge, we develop an adaptive testing environment that bolsters evaluation robustness by incorporating multiple surrogate models and optimizing the combination coefficients of these surrogate models to enhance evaluation efficiency. We formulate the optimization problem as a regression task utilizing quadratic programming. To efficiently obtain the regression target via reinforcement learning, we propose the dense reinforcement learning method and devise a new adaptive policy with high sample efficiency. Essentially, our approach centers on learning the values of critical scenes displaying substantial surrogate-to-real gaps. The effectiveness of our method is validated in high-dimensional overtaking scenarios, demonstrating that our approach achieves notable evaluation efficiency.

Though CLIP-based prompt tuning significantly enhances pre-trained Vision-Language Models, existing research focuses on reconstructing the model architecture, e.g., additional loss calculation and meta-networks. These approaches generally lead to increased complexity and extended training cost. To maintain the efficiency of the tuning process, we propose plug-and-play Model-Agnostic Optimization (MAO) for prompt tuning. Without altering any components of the prompt tuning backbone, we introduce a Data-Driven Enhancement framework to optimize the distribution of the initial data, and incorporate an Alterable Regularization module to boost the task-specific feature processing pipeline, thereby improving overall performance while maintaining low computational cost. Extensive experiments on MAO demonstrate its outstanding performance and efficiency. The code of MAO is available at: https://github.com/JREion/M.A.O .

AI agents are increasingly deployed on complex, domain-specific workflows -- navigating enterprise web applications that require dozens of clicks and form fills, orchestrating multi-step research pipelines that span search, extraction, and synthesis, automating code review across unfamiliar repositories, and handling customer escalations that demand nuanced domain knowledge. Each new task domain requires painstaking, expert-driven harness engineering: designing the prompts, tools, orchestration logic, and evaluation criteria that make a foundation model effective. We present a two-level framework that automates this process. At the first level, the Harness Evolution Loop optimizes a worker agent's harness H for a single task: a Worker Agent W_{H} executes the task, an Evaluator Agent V adversarially diagnoses failures and scores performance, and an Evolution Agent E modifies the harness based on the full history of prior attempts. At the second level, the Meta-Evolution Loop optimizes the evolution protocol Λ= (W_{H}, H^{(0)}, V, E) itself across diverse tasks, learning a protocol Λ^{(text{best)} that enables rapid harness convergence on any new task -- so that adapting an agent to a novel domain requires no human harness engineering at all.} We formalize the correspondence to meta-learning and present both algorithms. The framework shifts manual harness engineering into automated harness engineering, and takes one step further -- automating the design of the automation itself.

LLM agents increasingly rely on agent harness: the runtime infrastructure around the base model that defines execution environments, tool interfaces, context, lifecycle orchestration, observability, verification, and governance. Existing self-improving agents and automatic harness evolution methods mainly improve agents through runtime supervision, prompt optimization, workflow search, or harness modification based on final outcomes. However, they often fail to diagnose where the responsible evidence lies in failed trajectories and which harness implementation mechanism causes the unreliable behavior, resulting in broad, indirect, or poorly scoped changes. This paper proposes HarnessFix, a trace-grounded and diagnosis-driven framework for repairing agent harnesses. HarnessFix compiles raw execution traces and harness artifacts into a Harness-aware Trace Intermediate Representation (HTIR), which normalizes fragmented trajectory evidence, captures step-level data-flow and control-flow relations, and aligns runtime steps with the harness artifacts that shape their behavior. It then attributes failures to responsible steps and harness artifacts, and consolidates recurring diagnoses into repair-oriented flaw records. Finally, HarnessFix maps these records to scoped repair operators, generates patches under flaw-specific repair specifications, and accepts them through regression-aware validation. We evaluate HarnessFix on four popular benchmarks, and results show that it improves the performance over the initial harnesses by 6.3% to 18.4%, significantly outperforming human-designed and self-evolution baselines. HarnessFix highlights the value of treating failed trajectories not only as feedback signals, but also as structured evidence for diagnosing and repairing the harness mechanisms behind agent failures.

Coding harnesses such as Claude Code and OpenHands wrap foundation models with tools, memory, and planning, but no equivalent exists for embodied agents' long-horizon partial-observability decision-making. We first report our Gemini Plays Pokemon (GPP) experiments. With iterative human-in-the-loop harness refinement, GPP became the first AI system to complete Pokemon Blue, Yellow Legacy on hard mode, and Crystal without a lost battle. In the hardest stages, the agent itself began iterating on its strategy through long-context memory, surfacing emergent self-improvement signals alongside human-in-the-loop refinement. Continual Harness removes the human fully from this loop: a reset-free self-improving harness for embodied agents that formalizes and automates what we observed. Starting from only a minimal environment interface, the agent alternates between acting and refining its own prompt, sub-agents, skills, and memory, drawing on any past trajectory data. Prompt-optimization methods require episode resets; Continual Harness adapts online within a single run. On Pokemon Red and Emerald across frontier models, Continual Harness starting from scratch substantially reduces button-press cost relative to the minimalist baseline and recovers a majority of the gap to a hand-engineered expert harness, with capability-dependent gains, despite starting from the same raw interface with no curated knowledge, no hand-crafted tools, and no domain scaffolding. We then close the loop with the model itself: an online process-reward co-learning loop, in which an open-source agent's rollouts through the refining harness are relabeled by a frontier teacher and used to update the model, drives sustained in-game milestone progress on Pokemon Red without resetting the environment between training iterations.

Intervention-based model steering offers a lightweight and interpretable alternative to prompting and fine-tuning. However, by adapting strong optimization objectives from fine-tuning, current methods are susceptible to overfitting and often underperform, sometimes generating unnatural outputs. We hypothesize that this is because effective steering requires the faithful identification of internal model mechanisms, not the enforcement of external preferences. To this end, we build on the principles of distributed alignment search (DAS), the standard for causal variable localization, to propose a new steering method: Concept DAS (CDAS). While we adopt the core mechanism of DAS, distributed interchange intervention (DII), we introduce a novel distribution matching objective tailored for the steering task by aligning intervened output distributions with counterfactual distributions. CDAS differs from prior work in two main ways: first, it learns interventions via weak-supervised distribution matching rather than probability maximization; second, it uses DIIs that naturally enable bi-directional steering and allow steering factors to be derived from data, reducing the effort required for hyperparameter tuning and resulting in more faithful and stable control. On AxBench, a large-scale model steering benchmark, we show that CDAS does not always outperform preference-optimization methods but may benefit more from increased model scale. In two safety-related case studies, overriding refusal behaviors of safety-aligned models and neutralizing a chain-of-thought backdoor, CDAS achieves systematic steering while maintaining general model utility. These results indicate that CDAS is complementary to preference-optimization approaches and conditionally constitutes a robust approach to intervention-based model steering. Our code is available at https://github.com/colored-dye/concept_das.

We study the problem of constrained efficient global optimization, where both the objective and constraints are expensive black-box functions that can be learned with Gaussian processes. We propose CONFIG (CONstrained efFIcient Global Optimization), a simple and effective algorithm to solve it. Under certain regularity assumptions, we show that our algorithm enjoys the same cumulative regret bound as that in the unconstrained case and similar cumulative constraint violation upper bounds. For commonly used Matern and Squared Exponential kernels, our bounds are sublinear and allow us to derive a convergence rate to the optimal solution of the original constrained problem. In addition, our method naturally provides a scheme to declare infeasibility when the original black-box optimization problem is infeasible. Numerical experiments on sampled instances from the Gaussian process, artificial numerical problems, and a black-box building controller tuning problem all demonstrate the competitive performance of our algorithm. Compared to the other state-of-the-art methods, our algorithm significantly improves the theoretical guarantees, while achieving competitive empirical performance.

Most reported gains from agent-optimization methods are one-shot: an agent is optimized against a fixed benchmark and the resulting improvement is reported as if it were a stable property of the method. This does not test the setting that matters for deployed agents, where optimization is applied recursively as new failures and new tasks appear over time. The central question this raises is whether optimizer-driven gains compound: after an agent has been optimized once, can it be optimized again on newly arrived tasks without eroding the gains the first round produced? We study this question with a two-phase continual-learning evaluation built from hard tasks in Terminal-Bench 2.0, comparing three approaches to agent-harness optimization (GEPA, Meta Harness, and RELAI's Verifiable Continual Learning, RELAI-VCL) under identical optimization budgets. All three methods improve over the baseline agent in the conventional, static, single-phase setting. However, once new tasks are introduced, the methods diverge sharply: GEPA's optimized agent transfers below the unoptimized baseline, Meta Harness transfers well but fails to improve further once given a second optimization budget, and RELAI-VCL is the only method that both transfers positively to unseen tasks and continues improving after those tasks are folded into the optimization objective, reaching the highest pass rate at every evaluated stage and the highest lifelong average pass rate overall (76.4% vs. 66.0% for GEPA, 64.6% for Meta Harness, and 58.7% for the baseline). Our key observation was that optimization gains compounded only when regression control was built into the optimization loop, providing an inductive bias against shortcut solutions that fail to generalize.

Solving an NP-hard optimization problem often requires reformulating it for a specific solver -- quantum hardware, a commercial optimizer, or a domain heuristic. A tool for polynomial-time reductions between hard problems would let practitioners route any supported problem to any supported solver through a single interface. Building such a library at scale, however, has remained out of reach. We show that harness engineering, the practice of designing constraints, verification systems, and feedback loops that channel AI coding agents, can overcome this barrier. Our harness combines a no-code contribution route for domain experts, a multilayer verification stack ranging from type-level checks to agentic feature tests (AI agents role-playing as end users), and a fully automated implementation-review-integration pipeline. In about three months, we built a command-line tool backed by a library of 100+ problem types and 200+~reduction rules in over 170k lines of Rust. The result suggests that a well-engineered harness lets agents build well-tested software at a scale and pace beyond prior reduction-library efforts. Because the reduction graph composes transitively, a new solver registered for any single problem type instantly becomes available to every problem connected by a reduction path. The source code is available at https://github.com/CodingThrust/problem-reductions.

We introduce a gradient-based approach for the problem of Bayesian optimal experimental design to learn causal models in a batch setting -- a critical component for causal discovery from finite data where interventions can be costly or risky. Existing methods rely on greedy approximations to construct a batch of experiments while using black-box methods to optimize over a single target-state pair to intervene with. In this work, we completely dispose of the black-box optimization techniques and greedy heuristics and instead propose a conceptually simple end-to-end gradient-based optimization procedure to acquire a set of optimal intervention target-state pairs. Such a procedure enables parameterization of the design space to efficiently optimize over a batch of multi-target-state interventions, a setting which has hitherto not been explored due to its complexity. We demonstrate that our proposed method outperforms baselines and existing acquisition strategies in both single-target and multi-target settings across a number of synthetic datasets.

Recent years have seen considerable progress in the continual training of deep neural networks, predominantly thanks to approaches that add replay or regularization terms to the loss function to approximate the joint loss over all tasks so far. However, we show that even with a perfect approximation to the joint loss, these approaches still suffer from temporary but substantial forgetting when starting to train on a new task. Motivated by this 'stability gap', we propose that continual learning strategies should focus not only on the optimization objective, but also on the way this objective is optimized. While there is some continual learning work that alters the optimization trajectory (e.g., using gradient projection techniques), this line of research is positioned as alternative to improving the optimization objective, while we argue it should be complementary. To evaluate the merits of our proposition, we plan to combine replay-approximated joint objectives with gradient projection-based optimization routines to test whether the addition of the latter provides benefits in terms of (1) alleviating the stability gap, (2) increasing the learning efficiency and (3) improving the final learning outcome.

Reinforcement learning with verifiable rewards (RLVR) plays a crucial role in expanding the capacities of LLM reasoning, but GRPO-style training is dominated by expensive rollouts and wastes compute on unusable prompts. We propose Prompt Replay, an overhead-free online data selection method for GRPO that reuses prompts only (not trajectories), to preserve on-policy optimization. After each step, we insert prompts with medium difficulty into a buffer, and prioritize prompts closer to a pass rate of 0.5 (half answers correct, half wrong) to maximize the advantage, thus learning signal. Training batches are formed by mixing reused prompts with fresh samples, with cooldown steps and max reuse times controlling aggressiveness vs risk of overfitting. Across multiple model families (Llama-3.2- 3B, Qwen3-8B) and training datasets (Dolci, Polaris), evaluated using average accuracy on six standard math benchmarks, Prompt Replay reduces zero-variance prompts, increases mean absolute advantage and shows faster initial accuracy gains. Yet, it plateaus and converges with the baseline, as too aggressive configuration was used. The method is most efficient when the rollouts are the primary bottleneck and the dataset is difficult for the model. We additionally observe that Qwen2.5-Math can exhibit spurious-reward effects that invalidates ablations, raising a warning signal for using it as a sole testbed for GRPO method research.

LLM agents are increasingly expected to operate across heterogeneous task regimes that require distinct execution paradigms. This challenges fixed agent systems and motivates system-level meta-adaptation beyond isolated component updates. While existing works have adapted external harness or trained underlying reasoning policies, full-system adaptation remains insufficiently characterized. The adaptation space between structure and execution is rarely made explicit, and the compatibility between the external harness and the internal reasoner is not optimized jointly. We propose HarnessForge, a meta-adaptive framework for evolving LLM agent systems. HarnessForge formulates an agent system as a harness--policy pair, defining a stable adaptation space that separates harness-level execution structure from policy-level reasoning behavior. It then performs harness--policy co-evolution through fault-guided harness tailoring and harness-conditioned policy alignment. Experiments across five benchmarks from diverse domains show that HarnessForge consistently improves both Qwen3-4B and Qwen3-8B backbones, outperforming harness-only and policy-only baselines with gains of up to 12.0\% over the strongest baseline and achieving favorable rollout-efficiency tradeoffs, demonstrating that harness--policy co-evolution is effective, and that executable compatibility between the harness and reasoning policy is essential for agent-system adaptation. The code is available at https://github.com/mingju-c/HarnessForge.

Topology optimization (TO) provides a principled mathematical approach for optimizing the performance of a structure by designing its material spatial distribution in a pre-defined domain and subject to a set of constraints. The majority of existing TO approaches leverage numerical solvers for design evaluations during the optimization and hence have a nested nature and rely on discretizing the design variables. Contrary to these approaches, herein we develop a new class of TO methods based on the framework of Gaussian processes (GPs) whose mean functions are parameterized via deep neural networks. Specifically, we place GP priors on all design and state variables to represent them via parameterized continuous functions. These GPs share a deep neural network as their mean function but have as many independent kernels as there are state and design variables. We estimate all the parameters of our model in a single for loop that optimizes a penalized version of the performance metric where the penalty terms correspond to the state equations and design constraints. Attractive features of our approach include (1) having a built-in continuation nature since the performance metric is optimized at the same time that the state equations are solved, and (2) being discretization-invariant and accommodating complex domains and topologies. To test our method against conventional TO approaches implemented in commercial software, we evaluate it on four problems involving the minimization of dissipated power in Stokes flow. The results indicate that our approach does not need filtering techniques, has consistent computational costs, and is highly robust against random initializations and problem setup.

We show that learning-rate schedules for large model training behave surprisingly similar to a performance bound from non-smooth convex optimization theory. We provide a bound for the constant schedule with linear cooldown; in particular, the practical benefit of cooldown is reflected in the bound due to the absence of logarithmic terms. Further, we show that this surprisingly close match between optimization theory and practice can be exploited for learning-rate tuning: we achieve noticeable improvements for training 124M and 210M Llama-type models by (i) extending the schedule for continued training with optimal learning-rate, and (ii) transferring the optimal learning-rate across schedules.

Classifier-free guidance (CFG) is a widely used technique for controllable generation in diffusion and flow-based models. Despite its empirical success, CFG relies on a heuristic linear extrapolation that is often sensitive to the guidance scale. In this work, we provide a principled interpretation of CFG through the lens of optimization. We demonstrate that the velocity field in flow matching corresponds to the gradient of a sequence of smoothed distance functions, which guides latent variables toward the scaled target image set. This perspective reveals that the standard CFG formulation is an approximation of this gradient, where the prediction gap, the discrepancy between conditional and unconditional outputs, governs guidance sensitivity. Leveraging this insight, we reformulate the CFG sampling as a homotopy optimization with a manifold constraint. This formulation necessitates a manifold projection step, which we implement via an incremental gradient descent scheme during sampling. To improve computational efficiency and stability, we further enhance this iterative process with Anderson Acceleration without requiring additional model evaluations. Our proposed methods are training-free and consistently refine generation fidelity, prompt alignment, and robustness to the guidance scale. We validate their effectiveness across diverse benchmarks, demonstrating significant improvements on large-scale models such as DiT-XL-2-256, Flux, and Stable Diffusion 3.5.

An LLM agent's real-task performance is shaped as much by the harness around its model as by the frozen model itself: its prompts, injected knowledge, runtime control, and configuration. In deployment the harness is often the only lever available, so improving it automatically is the natural way to raise performance without touching the weights. The hard part is not generating changes but knowing which one truly helped. Self-generated feedback is noisy, and an apparent gain can be a measurement artifact or an edit that merely overfits the tasks it was tuned on. We present a self-evolving agent-harness framework that separates proposing changes from crediting them: a language model diagnoses failures and proposes patches, while all sampling, measurement, and significance testing are owned by deterministic code, so every credited improvement is trustworthy by construction. Patches populate a gated, categorical quality-diversity archive (GSME) keyed on the (WHERE x WHY) pathology an edit addresses rather than the tasks it fixes, an anti-overfitting inductive bias; generalization is measured on a sealed test scored only after evolution. Across seven domains with a frozen open-weight model, the harness is train-selected and scored once on a sealed test; its credited gains there are +9 to +15.5pp and retain 86-147% of the training gain, evidence they generalize rather than overfit. The winning patch tracks the model's dominant pathology, not its size or family: changing the model can change the pathology and the patch, while the same pathology-to-patch match recurs across two model families. What transfers is the diagnose-and-credit loop, not any specific harness.

AI agent performance depends critically on the runtime harness, comprising the prompts, tools, memory, and control flow that mediate how a model observes, reasons, and acts. Yet today's harnesses remain largely hand-crafted and static: each new model or task still demands bespoke scaffolding, and the rich traces produced during execution are rarely distilled back into systematic improvement. We introduce HarnessX, a foundry for composable, adaptive, and evolvable agent harnesses. HarnessX assembles typed harness primitives via a substitution algebra, adapts them through AEGIS, a trace-driven multi-agent evolution engine grounded in an operational mirror between symbolic adaptation and reinforcement learning, and closes the harness-model loop by turning trajectories into both harness updates and model training signal. Across five benchmarks (ALFWorld, GAIA, WebShop, tau^3-Bench, and SWE-bench Verified), HarnessX yields an average gain of +14.5% (up to +44.0%), with gains largest where baselines are lowest. These results suggest that agent progress need not come from model scaling alone: composing and evolving runtime interfaces from execution feedback is an actionable and complementary lever. The complete codebase will be open-sourced in a future release.

A prevalent assumption in LLM agent deployment holds that more structured harnesses universally improve reliability, and that higher-capability models need proportionally less structural guidance -- together implying a monotone inverse relationship between model capability tier and optimal harness complexity. We test this hypothesis through a controlled 432-run experiment crossing six models across four capability tiers with three harness conditions (light, balanced, strict) on HEAT-24, a 24-task synthetic benchmark with git-based workspace verification. Our results refute the monotone inverse relationship on two fronts. First, for the frontier chat model evaluated (Gemini 2.5 Flash), increased harness verbosity lowers VTSR by 29-38 percentage points -- a harness-complexity paradox. Second, for the frontier reasoning model evaluated (Qwen3.5-122B, extended thinking enabled), strict harness achieves the highest VTSR (91.7%) and the lowest latency, the opposite of the prediction. Within the constrained tier, a 2B model (Gemma4:e2B) matches strong-open-tier stability at 91.7% across all harnesses. Because each tier is represented by a single model in this study, these results should be interpreted as model-specific observations; harness sensitivity appears non-monotone across the models evaluated, and depends critically on model type (chat vs. reasoning). We introduce a six-label failure taxonomy showing that format_violation dominates capable-model failures while wrong_file dominates low-capability failures, and we derive practical tier-aware harness selection guidelines.

We consider the task of evaluating policies of algorithmic resource allocation through randomized controlled trials (RCTs). Such policies are tasked with optimizing the utilization of limited intervention resources, with the goal of maximizing the benefits derived. Evaluation of such allocation policies through RCTs proves difficult, notwithstanding the scale of the trial, because the individuals' outcomes are inextricably interlinked through resource constraints controlling the policy decisions. Our key contribution is to present a new estimator leveraging our proposed novel concept, that involves retrospective reshuffling of participants across experimental arms at the end of an RCT. We identify conditions under which such reassignments are permissible and can be leveraged to construct counterfactual trials, whose outcomes can be accurately ascertained, for free. We prove theoretically that such an estimator is more accurate than common estimators based on sample means -- we show that it returns an unbiased estimate and simultaneously reduces variance. We demonstrate the value of our approach through empirical experiments on synthetic, semi-synthetic as well as real case study data and show improved estimation accuracy across the board.

LLM agents increasingly rely on external inference conditions: prompts, tools, memory, SOPs, skills, and harness feedback. These assets can improve task execution without changing model weights, but they are often revised by heuristic reflection or by reusing observed successes and failures as if counts alone were reliable belief. We introduce Bayesian-Agent, a native and cross-harness framework that treats reusable skills and SOPs as hypotheses about whether a frozen model will succeed under a particular prompt, context, and harness environment. Bayesian-Agent records verified trajectory evidence, maintains a feature-conditioned categorical posterior over each skill, and maps posterior state into inspectable actions such as patch, split, compress, retire, and explore. Model-facing prompts receive executable guardrails and failure-mode patches, while posterior summaries remain available for audit. With deepseek-v4-flash, incremental repair improves SOP-Bench from 80\% to 95\%, Lifelong AgentBench from 90\% to 100\%, and RealFin-Bench from 45\% to 65\%. We further evaluate Bayesian-Agent's native backend and optional GenericAgent, mini-swe-agent, and Claude Code backends. The results include positive, negative, saturated, and case-study settings, suggesting that agent skill evolution is best viewed as posterior-guided harness optimization rather than uncalibrated prompt accumulation. The source code is available at https://github.com/DataArcTech/Bayesian-Agent.

Harnesses are now central to coding-agent performance, mediating how models interact with tools and execution environments. Yet harness engineering remains a manual craft, because automating it faces a heterogeneous action space across editable components, voluminous trajectories that bury actionable signal, and edits whose effect is hard to attribute. We introduce Agentic Harness Engineering (AHE), a closed loop that addresses these challenges through three matched observability pillars: (1) component observability gives every editable harness component a file-level representation so the action space is explicit and revertible; (2) experience observability distills millions of raw trajectory tokens into a layered, drill-down evidence corpus that an evolving agent can actually consume; and (3) decision observability pairs every edit with a self-declared prediction, later verified against the next round's task-level outcomes. Together, these pillars turn every edit into a falsifiable contract, so harness evolution proceeds autonomously without collapsing into trial-and-error. Empirically, ten AHE iterations lift pass@1 on Terminal-Bench 2 from 69.7% to 77.0%, surpassing the human-designed harness Codex-CLI (71.9%) and the self-evolving baselines ACE and TF-GRPO. The frozen harness transfers without re-evolution: on SWE-bench-verified it tops aggregate success at 12% fewer tokens than the seed, and on Terminal-Bench 2 it yields +5.1 to +10.1pp cross-family gains across three alternate model families, indicating the evolved components encode general engineering experience rather than benchmark-specific tuning. Ablations localize the gain to tools, middleware, and long-term memory rather than the system prompt, suggesting factual harness structure transfers while prose-level strategy does not.

We introduce Riemannian Lyapunov Optimizers (RLOs), a family of optimization algorithms that unifies classic optimizers within one geometric framework. Unlike heuristic improvements to existing optimizers, RLOs are systematically derived from a novel control-theoretic framework that reinterprets optimization as an extended state discrete-time controlled dynamical system on a Riemannian parameter manifold. Central to this framework is the identification of a Normally Attracting Invariant Manifold (NAIM), which organizes training dynamics into two distinct stages: rapid alignment of the speed state to a target graph, followed by controlled evolution within it. We formalize this by constructing a strict Lyapunov function that certifies convergence to a target manifold. This perspective yields a constructive ``optimizer generator" that not only recovers classic algorithms but enables the principled design of RLOs. We validate our theory via geometric diagnostics and demonstrate that grounding optimizer design in control theory yields state-of-the-art performance in large-scale benchmarks. Overall, RLOs bridge control theory and modern machine learning optimization, providing a unified language and a systematic toolkit for designing stable, effective optimizers.

Large language models (LLMs) have become increasingly capable of following instructions and complex reasoning, making prompting a flexible interface for adapting models without parameter updates. Yet prompt design remains labor-intensive and highly sensitive to formatting, phrasing, and instruction order, motivating automated prompt optimization methods that reduce manual effort while preserving inference-time flexibility. However, existing methods often search over prompt candidates or use fixed critique-refine pipelines driven by individual examples or small batches, limiting their ability to capture systematic error patterns and make targeted edits grounded in failure history. We propose Reflective Prompt Tuning (RPT), a framework that uses LLM function calling to simulate the iterative workflow of human prompt engineers. An LLM optimizer calls a diagnostic function that evaluates the target model over an entire optimization set, summarizes recurring failure modes, and returns a structured diagnostic report. The optimizer uses this report, together with an accumulated memory of prior reports, to revise the prompt for the next iteration. RPT further supports confidence-aware optimization by using calibration signals in diagnostic feedback and final prompt selection. Across three reasoning tasks, RPT improves over initial prompts by up to 12.9 points, remains competitive with state of the art, and improves confidence calibration. Our analyses show that RPT is especially effective on multi-hop and mathematical reasoning, producing targeted prompt revisions that align with diagnosed failure patterns and lead to gains in task performance and calibration.

Optimizer selection for large-scale model training has become a system-level design decision constrained jointly by compute, memory, tuning budget, and task diversity, yet the landscape of over one hundred methods remains fragmented. We therefore present OmniOpt, a unified survey and benchmark cookbook of optimizers for the research community. OmniOpt rests on four coupled components. First, we treat every optimizer update as a structured transformation through a five-stage meta-pipeline, and show that most methods engage only one or two of these stages. Second, we use norm-constrained linear minimization oracles (LMOs) to unify different optimizers. Third, these two views ground a dual-dimension taxonomy, one dimension assigning each method to a mechanism family and the other recording the measurable training objectives it aims to improve. Fourth, and at the core of this paper, we instantiate the full taxonomy in a unified cross-domain benchmark spanning representative optimizers, model scales, and training regimes from language model pretraining to image classification, systematically analyzing each method family across multiple effect objectives and laying out their trade-offs. OmniOpt thus supplies the research community with an operational coordinate system for selecting optimizers under explicit mechanism and objective assumptions, and charts a direction for the future development of the optimizer community.

Dealing with sparse rewards is one of the biggest challenges in Reinforcement Learning (RL). We present a novel technique called Hindsight Experience Replay which allows sample-efficient learning from rewards which are sparse and binary and therefore avoid the need for complicated reward engineering. It can be combined with an arbitrary off-policy RL algorithm and may be seen as a form of implicit curriculum. We demonstrate our approach on the task of manipulating objects with a robotic arm. In particular, we run experiments on three different tasks: pushing, sliding, and pick-and-place, in each case using only binary rewards indicating whether or not the task is completed. Our ablation studies show that Hindsight Experience Replay is a crucial ingredient which makes training possible in these challenging environments. We show that our policies trained on a physics simulation can be deployed on a physical robot and successfully complete the task.

We propose constrained causal Bayesian optimization (cCBO), an approach for finding interventions in a known causal graph that optimize a target variable under some constraints. cCBO first reduces the search space by exploiting the graph structure and, if available, an observational dataset; and then solves the restricted optimization problem by modelling target and constraint quantities using Gaussian processes and by sequentially selecting interventions via a constrained expected improvement acquisition function. We propose different surrogate models that enable to integrate observational and interventional data while capturing correlation among effects with increasing levels of sophistication. We evaluate cCBO on artificial and real-world causal graphs showing successful trade off between fast convergence and percentage of feasible interventions.

In multi-fidelity optimization, biased approximations of varying costs of the target function are available. This paper studies the problem of optimizing a locally smooth function with a limited budget, where the learner has to make a tradeoff between the cost and the bias of these approximations. We first prove lower bounds for the simple regret under different assumptions on the fidelities, based on a cost-to-bias function. We then present the Kometo algorithm which achieves, with additional logarithmic factors, the same rates without any knowledge of the function smoothness and fidelity assumptions, and improves previously proven guarantees. We finally empirically show that our algorithm outperforms previous multi-fidelity optimization methods without the knowledge of problem-dependent parameters.

Artificial Intelligence (AI) advancement is heavily dependent on access to large-scale, high-quality training data. However, in specialized domains such as healthcare, data acquisition faces significant constraints due to privacy regulations, ethical considerations, and limited availability. While synthetic data generation offers a promising solution, conventional approaches typically require substantial real data for training generative models. The emergence of large-scale prompt-based models presents new opportunities for synthetic data generation without direct access to protected data. However, crafting effective prompts for domain-specific data generation remains challenging, and manual prompt engineering proves insufficient for achieving output with sufficient precision and authenticity. We review recent developments in automatic prompt optimization, following PRISMA guidelines. We analyze six peer-reviewed studies published between 2020 and 2024 that focus on automatic data-free prompt optimization methods. Our analysis reveals three approaches: feedback-driven, error-based, and control-theoretic. Although all approaches demonstrate promising capabilities in prompt refinement and adaptation, our findings suggest the need for an integrated framework that combines complementary optimization techniques to enhance synthetic data generation while minimizing manual intervention. We propose future research directions toward developing robust, iterative prompt optimization frameworks capable of improving the quality of synthetic data. This advancement can be particularly crucial for sensitive fields and in specialized domains where data access is restricted, potentially transforming how we approach synthetic data generation for AI development.

Optimal configuration of the learning rate (LR) is a fundamental yet formidable challenge in large-scale pre-training. Given the stringent trade-off between training costs and model performance, the pivotal question is whether the optimal LR can be accurately extrapolated from low-cost experiments. In this paper, we formalize this investigation into two distinct research paradigms: Fitting and Transfer. Within the Fitting Paradigm, we innovatively introduce a Scaling Law for search factor, effectively reducing the search complexity from O(n^3) to O(n*C_D*C_η) via predictive modeling. Within the Transfer Paradigm, we extend the principles of μTransfer to the Mixture of Experts (MoE) architecture, broadening its applicability to encompass model depth, weight decay, and token horizons. By pushing the boundaries of existing hyperparameter research in terms of scale, we conduct a comprehensive comparison between these two paradigms. Our empirical results challenge the scalability of the widely adopted μ Transfer in large-scale pre-training scenarios. Furthermore, we provide a rigorous analysis through the dual lenses of training stability and feature learning to elucidate the underlying reasons why module-wise parameter tuning underperforms in large-scale settings. This work offers systematic practical guidelines and a fresh theoretical perspective for optimizing industrial-level pre-training.

Bayesian Optimization (BO) is a foundational strategy in the field of engineering design optimization for efficiently handling black-box functions with many constraints and expensive evaluations. This paper introduces a fast and accurate BO framework that leverages Pre-trained Transformers for Bayesian Optimization (PFN4sBO) to address constrained optimization problems in engineering. Unlike traditional BO methods that rely heavily on Gaussian Processes (GPs), our approach utilizes Prior-data Fitted Networks (PFNs), a type of pre-trained transformer, to infer constraints and optimal solutions without requiring any iterative retraining. We demonstrate the effectiveness of PFN-based BO through a comprehensive benchmark consisting of fifteen test problems, encompassing synthetic, structural, and engineering design challenges. Our findings reveal that PFN-based BO significantly outperforms Constrained Expected Improvement and Penalty-based GP methods by an order of magnitude in speed while also outperforming them in accuracy in identifying feasible, optimal solutions. This work showcases the potential of integrating machine learning with optimization techniques in solving complex engineering challenges, heralding a significant leap forward for optimization methodologies, opening up the path to using PFN-based BO to solve other challenging problems, such as enabling user-guided interactive BO, adaptive experiment design, or multi-objective design optimization. Additionally, we establish a benchmark for evaluating BO algorithms in engineering design, offering a robust platform for future research and development in the field. This benchmark framework for evaluating new BO algorithms in engineering design will be published at https://github.com/rosenyu304/BOEngineeringBenchmark.

Agent harness evolution improves frozen language-model agents by modifying the executable structures around them. We study this paradigm as a form of sample-efficient fast adaptation: instead of updating model weights, an agent can acquire task-specific competence by changing its external harness, while leaving the base model's general capabilities intact. Prior work shows that self-generated rollouts can support harness search, suggesting that agents may acquire new task competence through practice. Yet in long-horizon stochastic environments, self-practice becomes fragile: rewards are sparse, outcomes are high-variance, and failures are hard to attribute to concrete harness mechanisms. We introduce DemoEvolve, a demonstration-bootstrapped approach to harness evolution. When reward-only search is too broad and noisy, competent human trajectories serve as expert reference experience for the coding proposer, guiding harness-level diagnosis and editing. Experiments on Liar's Dice show that self-rollout evolution can work when episodes are short and failures are attributable. In contrast, Balatro exposes a harder long-horizon stochastic regime, where self-rollout evolution is misled by sparse feedback and candidate-selection noise, while tutorial-like textual knowledge alone does not yield stable improvement. Under the same limited budget, DemoEvolve produces more effective and auditable harness edits and achieves better performance. Overall, demonstrations make sparse-feedback harness evolution more diagnosable, localizable, and stable.

Recently, GRPO-based reinforcement learning has shown remarkable progress in optimizing flow-matching models, effectively improving their alignment with task-specific rewards. Within these frameworks, the policy update relies on importance-ratio clipping to constrain overconfident positive and negative gradients. However, in practice, we observe a systematic shift in the importance-ratio distribution-its mean falls below 1 and its variance differs substantially across timesteps. This left-shifted and inconsistent distribution prevents positive-advantage samples from entering the clipped region, causing the mechanism to fail in constraining overconfident positive updates. As a result, the policy model inevitably enters an implicit over-optimization stage-while the proxy reward continues to increase, essential metrics such as image quality and text-prompt alignment deteriorate sharply, ultimately making the learned policy impractical for real-world use. To address this issue, we introduce GRPO-Guard, a simple yet effective enhancement to existing GRPO frameworks. Our method incorporates ratio normalization, which restores a balanced and step-consistent importance ratio, ensuring that PPO clipping properly constrains harmful updates across denoising timesteps. In addition, a gradient reweighting strategy equalizes policy gradients over noise conditions, preventing excessive updates from particular timestep regions. Together, these designs act as a regulated clipping mechanism, stabilizing optimization and substantially mitigating implicit over-optimization without relying on heavy KL regularization. Extensive experiments on multiple diffusion backbones (e.g., SD3.5M, Flux.1-dev) and diverse proxy tasks demonstrate that GRPO-Guard significantly reduces over-optimization while maintaining or even improving generation quality.

Causal Discovery plays a pivotal role in revealing relationships among observed variables, particularly in the temporal setup. While the majority of CD methods rely on synthetic data for evaluation, and recently for training, these fall short in accurately mirroring real-world scenarios; an effect even more evident in temporal data. Generation techniques depending on simplified assumptions on causal structure, effects and time, limit the quality and diversity of the simulated data. In this work, we introduce Temporal Causal-based Simulation (TCS), a robust framework for generating realistic time-series data and their associated temporal causal graphs. The approach is structured in three phases: estimating the true lagged causal structure of the data, approximating the functional dependencies between variables and learning the noise distribution of the corresponding causal model, each part of which can be explicitly tailored based on data assumptions and characteristics. Through an extensive evaluation process, we highlight that single detection methods for generated data discrimination prove inadequate, accentuating it as a multifaceted challenge. For this, we detail a Min-max optimization phase that draws on AutoML techniques. Our contributions include a flexible, model-agnostic pipeline for generating realistic temporal causal data, a thorough evaluation setup which enhances the validity of the generated datasets and insights into the challenges posed by realistic data generation. Through experiments involving not only real but also semi-synthetic and purely synthetic datasets, we demonstrate that while sampling realistic causal data remains a complex task, our method enriches the domain of generating sensible causal-based temporal data.

The performance of LLM-based agents is jointly shaped by their base models and the harnesses that mediate their interaction with the environment. Because different models exhibit distinct behaviors, effective harness design is inherently model-specific. Yet agent harnesses are still largely engineered by human experts, a paradigm that scales poorly as modern LLMs become increasingly diverse and rapidly evolving. In this paper, we introduce Self-Harness, a new paradigm in which an LLM-based agent improves its own operating harness, without relying on human engineers or stronger external agents. We operationalize Self-Harness as an iterative loop with three stages: Weakness Mining, which identifies model-specific failure patterns from execution traces; Harness Proposal, which generates diverse yet minimal harness modifications tied to these failures; and Proposal Validation, which accepts candidate edits only after regression testing. We instantiate Self-Harness on Terminal-Bench-2.0 using a minimal initial harness and three base models from diverse families: MiniMax M2.5, Qwen3.5-35B-A3B, and GLM-5. Across all three models, Self-Harness consistently improves performance, with held-out pass rates increasing from 40.5% to 61.9%, 23.8% to 38.1%, and 42.9% to 57.1%, respectively. Qualitative analyses further show that Self-Harness does not simply add generic instructions, but effectively turns model-specific weaknesses into concrete, executable harness changes. These results suggest a path toward LLM-based agents that are not merely shaped by their harnesses, but can also participate in reshaping them.

Large language models are increasingly deployed as agents for long-horizon tasks, yet their performance is shaped not only by model capability and environment design, but also by the harness that mediates agent--environment interaction. Existing harnesses are largely manually engineered, making them difficult to scale as trajectories grow longer and interactions become more complex. In this work, we ask whether harness can be generated by a learnable plug-in module that can be trained in an end-to-end fashion. We introduce HarnessBridge, a lightweight learnable harness controller that parameterizes the agent--environment interface as a bidirectional projection. HarnessBridge learns two bidirectional projections: observation projection, which distills raw trajectories into compact, decision-relevant states, and action projection, which converts proposed actions into executable transitions or trajectory-grounded rejections. We train HarnessBridge on a harness supervision dataset via unified instruction tuning. On Terminal-Bench~2.0 and SWE-bench Verified, HarnessBridge matches or surpasses strong specialized harnesses while substantially reducing token usage and trajectory length, and generalizes from smaller generators to larger commercial models.

Existing prompt-optimization techniques rely on local signals to update behavior, often neglecting broader and recurring patterns across tasks, leading to poor generalization; they further rely on full-prompt rewrites or unstructured merges, resulting in knowledge loss. These limitations are magnified in research-coding workflows, which involve heterogeneous repositories, underspecified environments, and weak feedback, where reproducing results from public codebases is an established evaluation regime. We introduce Reflective Evolving Research Engineer (REVERE), a framework that continuously learns from Global Training Context, recognizes recurring failure modes in cross-repository execution trajectories, distills them into reusable heuristics, and performs targeted edits across three configurable fields: the system prompt, a task-prompt template, and a cumulative cheatsheet. REVERE, via this reflective optimization framework, improves performance over prior state-of-the-art expert-crafted instructions on research coding tasks by 4.50% on SUPER, 3.51% on ResearchCodeBench, and 4.89% on ScienceAgentBench across their respective metrics. These results demonstrate that agents equipped with mechanisms for continual learning and global memory consolidation can meaningfully evolve their capabilities over time.

Diffusion models have demonstrated remarkable capabilities in generating high-quality samples and enhancing performance across diverse domains through Classifier-Free Guidance (CFG). However, the quality of generated samples is highly sensitive to the selection of the guidance weight. In this work, we identify a critical ``training-inference gap'' and we argue that it is the presence of this gap that undermines the performance of conditional generation and renders outputs highly sensitive to the guidance weight. We quantify this gap by measuring the accumulated error during the inference stage and establish a correlation between the selection of guidance weight and minimizing this gap. Furthermore, to mitigate this gap, we propose DiffIER, an optimization-based method for high-quality generation. We demonstrate that the accumulated error can be effectively reduced by an iterative error minimization at each step during inference. By introducing this novel plug-and-play optimization framework, we enable the optimization of errors at every single inference step and enhance generation quality. Empirical results demonstrate that our proposed method outperforms baseline approaches in conditional generation tasks. Furthermore, the method achieves consistent success in text-to-image generation, image super-resolution, and text-to-speech generation, underscoring its versatility and potential for broad applications in future research.

Humans are the bottleneck in building and improving AI. Both the models and the agents that wrap them are written, tuned, and corrected by people. The long-horizon goal of an AI that can figure out how to improve itself remains open. Two largely disjoint research lines attack this bottleneck. The harness-update school has a meta-agent rewrite the scaffold of a task-specific agent (its tools, prompts, retry logic, and search procedure) while the model weights are held fixed. The test-time training school uses hand-written RL pipelines to update the model's own weights on task feedback while the harness is held fixed. These two silos operate in isolation. We propose SIA, a self-improving loop in which a language-model agent (the Feedback-Agent) updates both the harness and the weights of a task-specific agent. We evaluate across three contrasting domains: Chinese legal charge classification, low-level GPU kernel optimisation, and single-cell RNA denoising. Combining both levers outperforms scaffold iteration alone on all three benchmarks. The gains are 56.6% on LawBench, 91.9% runtime reduction on GPU kernels, and 502% on denoising over the initial baseline. Harness updates make the model agentic, shaping how it searches and acts, while weight updates build the domain intuition that no prompt or scaffold can instil.

LLM-based Automatic Prompt Optimization, which typically utilizes LLMs as Prompt Optimizers to self-reflect and refine prompts, has shown promising performance in recent studies. Despite the success, the underlying mechanism of this approach remains unexplored, and the true effectiveness of LLMs as Prompt Optimizers requires further validation. In this work, we conducted a comprehensive study to uncover the actual mechanism of LLM-based Prompt Optimization. Our findings reveal that the LLM optimizers struggle to identify the true causes of errors during reflection, tending to be biased by their own prior knowledge rather than genuinely reflecting on the errors. Furthermore, even when the reflection is semantically valid, the LLM optimizers often fail to generate appropriate prompts for the target models with a single prompt refinement step, partly due to the unpredictable behaviors of the target models. Based on the observations, we introduce a new "Automatic Behavior Optimization" paradigm, which directly optimizes the target model's behavior in a more controllable manner. We hope our study can inspire new directions for automatic prompt optimization development.

Learned optimization has emerged as a promising alternative to hand-crafted optimizers, with the potential to discover stronger learned update rules that enable faster, hyperparameter-free training of neural networks. A critical element for practically useful learned optimizers, that can be used off-the-shelf after meta-training, is strong meta-generalization: the ability to apply the optimizers to new tasks. Recent state-of-the-art work in learned optimizers, VeLO (Metz et al., 2022), requires a large number of highly diverse meta-training tasks along with massive computational resources, 4000 TPU months, to achieve meta-generalization. This makes further improvements to such learned optimizers impractical. In this work, we identify several key elements in learned optimizer architectures and meta-training procedures that can lead to strong meta-generalization. We also propose evaluation metrics to reliably assess quantitative performance of an optimizer at scale on a set of evaluation tasks. Our proposed approach, Celo, makes a significant leap in improving the meta-generalization performance of learned optimizers and also outperforms tuned state-of-the-art optimizers on a diverse set of out-of-distribution tasks, despite being meta-trained for just 24 GPU hours.

The annealing phase is a pivotal convergence stage in LLM pre-training that ultimately determines final model quality. However, effectively selecting training data during this phase remains a key challenge. Current strategies rely on empirical heuristics, such as domain filtering or context extension, which lack a principled grounding in optimization theory. In this work, we characterize the annealing phase through the lens of the loss landscape's spectral geometry. We argue that optimal convergence requires gradient updates to satisfy heterogeneous constraints across different eigen-directions. Building on this insight, we formulate data selection as a problem of satisfying these directional constraints. To this end, we propose DiReCT (Directionally-Restrained Constrained Training), a novel framework that reformulates sample selection in the annealing stage as a constrained optimization problem. By imposing explicit directional constraints on per-sample gradients based on the spectral properties of the Hessian, DiReCT identifies samples that align with the optimal curvature-aware descent path. Extensive experiments across various model scales demonstrate that DiReCT consistently achieves state-of-the-art performance. For future research, code is available at https://github.com/xuyj233/Direct.

We study a class of optimization problems motivated by automating the design and update of AI systems like coding assistants, robots, and copilots. We propose an end-to-end optimization framework, Trace, which treats the computational workflow of an AI system as a graph akin to neural networks, based on a generalization of back-propagation. Optimization of computational workflows often involves rich feedback (e.g. console output or user's responses), heterogeneous parameters (e.g. prompts, hyper-parameters, codes), and intricate objectives (beyond maximizing a score). Moreover, its computation graph can change dynamically with the inputs and parameters. We frame a new mathematical setup of iterative optimization, Optimization with Trace Oracle (OPTO), to capture and abstract these properties so as to design optimizers that work across many domains. In OPTO, an optimizer receives an execution trace along with feedback on the computed output and updates parameters iteratively. Trace is the tool to implement OPTO in practice. Trace has a Python interface that efficiently converts a computational workflow into an OPTO instance using a PyTorch-like interface. Using Trace, we develop a general-purpose LLM-based optimizer called OptoPrime that can effectively solve OPTO problems. In empirical studies, we find that OptoPrime is capable of first-order numerical optimization, prompt optimization, hyper-parameter tuning, robot controller design, code debugging, etc., and is often competitive with specialized optimizers for each domain. We believe that Trace, OptoPrime and the OPTO framework will enable the next generation of interactive agents that automatically adapt using various kinds of feedback. Website: https://microsoft.github.io/Trace

The recent emergence of new algorithms for permuting models into functionally equivalent regions of the solution space has shed some light on the complexity of error surfaces, and some promising properties like mode connectivity. However, finding the right permutation is challenging, and current optimization techniques are not differentiable, which makes it difficult to integrate into a gradient-based optimization, and often leads to sub-optimal solutions. In this paper, we propose a Sinkhorn re-basin network with the ability to obtain the transportation plan that better suits a given objective. Unlike the current state-of-art, our method is differentiable and, therefore, easy to adapt to any task within the deep learning domain. Furthermore, we show the advantage of our re-basin method by proposing a new cost function that allows performing incremental learning by exploiting the linear mode connectivity property. The benefit of our method is compared against similar approaches from the literature, under several conditions for both optimal transport finding and linear mode connectivity. The effectiveness of our continual learning method based on re-basin is also shown for several common benchmark datasets, providing experimental results that are competitive with state-of-art results from the literature.

Self-improvement in AI agents has emerged as a key research frontier: systems that modify their own prompts, workflows, and decision rules based on accumulated operational experience. The state-of-the-art Self-Harness framework [1] achieves 14--21% improvement on Terminal-Bench-2.0 by mining failure clusters and patching the agent harness. However, Self-Harness optimises only one dimension -- the prompt harness -- leaving behavioural principles and workflow topology unchanged. We propose APEX (Adaptive Principle EXtraction), a three-layer co-evolution framework that simultaneously evolves: (L1) the harness via failure-mode patching, (L2) behavioural principles via success-trace distillation [2], and (L3) the agent workflow topology via structural fitness-based selection [6]. We implement APEX on Joe [13], a production-grade super AI Agent built on NVIDIA Nemotron and designed as an Edge AI Agent Factory for the NVIDIA Agent Challenge 2026, managing a 15-node compute fleet using 114 real task traces collected over 18 days. APEX achieves an APEX Health Score of 0.570 (+90% vs. baseline 0.300) in a single evolutionary run, distilling 6 novel reusable principles and selecting a research-first workflow topology scoring 0.900 (+20%). Our results demonstrate that multi-dimensional co-evolution substantially outperforms single-axis harness optimisation, at a cost of only 4 LLM calls (~270 s) on a local qwen2.5-coder:32b instance.

Recent studies have identified Direct Preference Optimization (DPO) as an efficient and reward-free approach to improving video generation quality. However, existing methods largely follow image-domain paradigms and are mainly developed on small-scale models (approximately 2B parameters), limiting their ability to address the unique challenges of video tasks, such as costly data construction, unstable training, and heavy memory consumption. To overcome these limitations, we introduce a GT-Pair that automatically builds high-quality preference pairs by using real videos as positives and model-generated videos as negatives, eliminating the need for any external annotation. We further present Reg-DPO, which incorporates the SFT loss as a regularization term into the DPO objective to enhance training stability and generation fidelity. Additionally, by combining the FSDP framework with multiple memory optimization techniques, our approach achieves nearly three times higher training capacity than using FSDP alone. Extensive experiments on both I2V and T2V tasks across multiple datasets demonstrate that our method consistently outperforms existing approaches, delivering superior video generation quality.

Automatic prompt optimization (APO) has emerged as a powerful paradigm for improving LLM performance without manual prompt engineering. Reflective APO methods such as GEPA iteratively refine prompts by diagnosing failure cases, but the optimization process remains black-box and label-free, leading to uninterpretable trajectories and systematic failure. We identify and empirically demonstrate four limitations: on GSM8K with a defective seed, GEPA degrades accuracy from 23.81% to 13.50%. We propose VISTA, a multi-agent APO framework that decouples hypothesis generation from prompt rewriting, enabling semantically labeled hypotheses, parallel minibatch verification, and interpretable optimization trace. A two-layer explore-exploit mechanism combining random restart and epsilon-greedy sampling further escapes local optima. VISTA recovers accuracy to 87.57% on the same defective seed and consistently outperforms baselines across all conditions on GSM8K and AIME2025.

Reinforcement Learning with Verifiable Rewards (RLVR) has emerged as a promising paradigm for post-training reasoning models. However, group-based methods such as Group Relative Policy Optimization (GRPO) face a critical dilemma in sparse-reward settings: pure Reinforcement Learning (RL) suffers from advantage collapse and high-variance gradient estimation, while mixed-policy optimization introduces persistent distributional bias. To resolve this dilemma, we introduce Hindsight-Anchored Policy Optimization (HAPO). HAPO employs the Synthetic Success Injection (SSI) operator, a hindsight mechanism that selectively anchors optimization to teacher demonstrations during failure. This injection is governed by a Thompson sampling-inspired gating mechanism, creating an autonomous, self-paced curriculum. Theoretically, we demonstrate that HAPO achieves asymptotic consistency: by naturally annealing the teacher signal as the policy improves, HAPO recovers the unbiased on-policy gradient. This ensures off-policy guidance acts as a temporary scaffold rather than a persistent ceiling, enabling the model to surpass the limitations of static teacher forcing.

Structure-Based molecule optimization (SBMO) aims to optimize molecules with both continuous coordinates and discrete types against protein targets. A promising direction is to exert gradient guidance on generative models given its remarkable success in images, but it is challenging to guide discrete data and risks inconsistencies between modalities. To this end, we leverage a continuous and differentiable space derived through Bayesian inference, presenting Molecule Joint Optimization (MolJO), the gradient-based SBMO framework that facilitates joint guidance signals across different modalities while preserving SE(3)-equivariance. We introduce a novel backward correction strategy that optimizes within a sliding window of the past histories, allowing for a seamless trade-off between explore-and-exploit during optimization. MolJO achieves state-of-the-art performance on CrossDocked2020 benchmark (Success Rate 51.3%, Vina Dock -9.05 and SA 0.78), more than 4x improvement in Success Rate compared to the gradient-based counterpart, and 2x "Me-Better" Ratio as much as 3D baselines. Furthermore, we extend MolJO to a wide range of optimization settings, including multi-objective optimization and challenging tasks in drug design such as R-group optimization and scaffold hopping, further underscoring its versatility. Code is available at https://github.com/AlgoMole/MolCRAFT.

Despite the integration of safety alignment and external filters, text-to-image (T2I) generative models are still susceptible to producing harmful content, such as sexual or violent imagery. This raises serious concerns about unintended exposure and potential misuse. Red teaming, which aims to proactively identify diverse prompts that can elicit unsafe outputs from the T2I system (including the core generative model as well as potential external safety filters and other processing components), is increasingly recognized as an essential method for assessing and improving safety before real-world deployment. Yet, existing automated red teaming approaches often treat prompt discovery as an isolated, prompt-level optimization task, which limits their scalability, diversity, and overall effectiveness. To bridge this gap, in this paper, we propose DREAM, a scalable red teaming framework to automatically uncover diverse problematic prompts from a given T2I system. Unlike most prior works that optimize prompts individually, DREAM directly models the probabilistic distribution of the target system's problematic prompts, which enables explicit optimization over both effectiveness and diversity, and allows efficient large-scale sampling after training. To achieve this without direct access to representative training samples, we draw inspiration from energy-based models and reformulate the objective into simple and tractable objectives. We further introduce GC-SPSA, an efficient optimization algorithm that provide stable gradient estimates through the long and potentially non-differentiable T2I pipeline. The effectiveness of DREAM is validated through extensive experiments, demonstrating that it surpasses 9 state-of-the-art baselines by a notable margin across a broad range of T2I models and safety filters in terms of prompt success rate and diversity.

While skill optimization for autonomous agents has gained traction, existing methods rely on complex pipelines. This leaves a fundamental question unaddressed: What constitutes a minimal viable pipeline for skill optimization, where every component is justified by theory or empirical necessity? We formalize skill optimization via Zeroth-Order (ZO) optimization, mapping classical counterparts (central difference, trust regions) to recent literature. Noting that unlike blind numerical perturbations in classical ZO, skill trajectories serve as interpretable debugging feedback. Grounded in Claude Code philosophy and PAC learning, we establish three principles for convergence and generalization: file-system-based trajectory exploration, consensus attribute mining, and independent validation gating. Eliminating redundancies, we propose SkillOpt-Lite. It accelerates convergence and outperforms full SkillOpt: improving LiveMath by +8.8 points on GPT-5.5 and +25.4 points on GPT-5.4-nano, allowing the nano model to surpass standard GPT-5.4 optimized by SkillOpt. Finally, we integrate our framework into production coding agents like VSCode Copilot, enabling developers to evolve agent skills via one line of vibe. Because our framework treats all agent components simply as standard editable code, this minimal pipeline naturally generalizes to full harness optimization (HarnessOpt). On SpreadsheetBench, HarnessOpt enables GPT-5.4-nano to achieve 0.7758 accuracy, outperforming the larger GPT-5.5 running standard pipelines (0.7620). Code is available at https://github.com/EvolvingLMMs-Lab/SkillOpt-Lite.

The Base-New Trade-off (BNT) problem universally exists during the optimization of CLIP-based prompt tuning, where continuous fine-tuning on base (target) classes leads to a simultaneous decrease of generalization ability on new (unseen) classes. Existing approaches attempt to regulate the prompt tuning process to balance BNT by appending constraints. However, imposed on the same target prompt, these constraints fail to fully avert the mutual exclusivity between the optimization directions for base and new. As a novel solution to this challenge, we propose the plug-and-play Dual-Prompt Collaboration (DPC) framework, the first that decoupling the optimization processes of base and new tasks at the prompt level. Specifically, we clone a learnable parallel prompt based on the backbone prompt, and introduce a variable Weighting-Decoupling framework to independently control the optimization directions of dual prompts specific to base or new tasks, thus avoiding the conflict in generalization. Meanwhile, we propose a Dynamic Hard Negative Optimizer, utilizing dual prompts to construct a more challenging optimization task on base classes for enhancement. For interpretability, we prove the feature channel invariance of the prompt vector during the optimization process, providing theoretical support for the Weighting-Decoupling of DPC. Extensive experiments on multiple backbones demonstrate that DPC can significantly improve base performance without introducing any external knowledge beyond the base classes, while maintaining generalization to new classes. Code is available at: https://github.com/JREion/DPC.

Generating high-fidelity 3D geometries under explicit parameter constraints is central to engineering design, yet current methods often require large datasets and fail to provide reliable control beyond the training distribution. We introduce LAMP, a data-efficient framework for controllable and interpretable 3D generation that aligns signed distance function (SDF) decoders by overfitting each exemplar from a shared initialization, then generates new designs by solving a parameter-constrained affine mixing problem in the aligned weight space. To improve reliability, we propose a linearity-mismatch safety metric that detects when mixed decoders leave the valid local regime. We evaluate LAMP on DrivAerNet++, BlendedNet, and additional industry-level vehicle families, including sports cars, SUVs, and convertibles. LAMP enables controlled interpolation with as few as 50 samples, safe extrapolation up to 100% beyond training ranges, and performance-guided optimization under fixed parameters, outperforming conditional autoencoder and Deep Network Interpolation (DNI) baselines in extrapolation, data efficiency, and parameter fidelity. Our results demonstrate that LAMP advances controllable, data-efficient, and safe 3D generation for design exploration, dataset generation, and performance-driven optimization.

Training a large and state-of-the-art machine learning model typically necessitates the use of large-scale datasets, which, in turn, makes the training and parameter-tuning process expensive and time-consuming. Some researchers opt to distil information from real-world datasets into tiny and compact synthetic datasets while maintaining their ability to train a well-performing model, hence proposing a data-efficient method known as Dataset Distillation (DD). Despite recent progress in this field, existing methods still underperform and cannot effectively replace large datasets. In this paper, unlike previous methods that focus solely on improving the efficacy of student distillation, we are the first to recognize the important interplay between expert and student. We argue the significant impact of expert smoothness when employing more potent expert trajectories in subsequent dataset distillation. Based on this, we introduce the integration of clipping loss and gradient penalty to regulate the rate of parameter changes in expert trajectories. Furthermore, in response to the sensitivity exhibited towards randomly initialized variables during distillation, we propose representative initialization for synthetic dataset and balanced inner-loop loss. Finally, we present two enhancement strategies, namely intermediate matching loss and weight perturbation, to mitigate the potential occurrence of cumulative errors. We conduct extensive experiments on datasets of different scales, sizes, and resolutions. The results demonstrate that the proposed method significantly outperforms prior methods.

Inverse design, where we seek to design input variables in order to optimize an underlying objective function, is an important problem that arises across fields such as mechanical engineering to aerospace engineering. Inverse design is typically formulated as an optimization problem, with recent works leveraging optimization across learned dynamics models. However, as models are optimized they tend to fall into adversarial modes, preventing effective sampling. We illustrate that by instead optimizing over the learned energy function captured by the diffusion model, we can avoid such adversarial examples and significantly improve design performance. We further illustrate how such a design system is compositional, enabling us to combine multiple different diffusion models representing subcomponents of our desired system to design systems with every specified component. In an N-body interaction task and a challenging 2D multi-airfoil design task, we demonstrate that by composing the learned diffusion model at test time, our method allows us to design initial states and boundary shapes that are more complex than those in the training data. Our method generalizes to more objects for N-body dataset and discovers formation flying to minimize drag in the multi-airfoil design task. Project website and code can be found at https://github.com/AI4Science-WestlakeU/cindm.

Lagrangian Relaxation (LR) is a powerful technique for solving large-scale Mixed Integer Linear Programming (MILP), particularly those with decomposable structures, such as vehicle routing or unit commitment problems. By relaxing the coupling constraints, LR enables parallel subproblem solving and often yields tighter dual bounds than standard linear programming relaxations, which is crucial for efficient branch-and-bound pruning. While recent empirical work has shown promising results using machine learning to predict these multipliers, a theoretical understanding of such methods remains an open question. In this work, we bridge this gap by analyzing the problem of learning LR through the lens of Data-driven Algorithm Design, i.e., a statistical learning problem over a distribution of problem instances. Our contributions are as follows: first, we derive a generalization bound of O(s^{1.5}/N) for the learned multipliers, where s is the number of coupling constraints and N is the sample size. Second, we provide a minimax lower-bound of Ω(s/N), proving that a linear dependency is unavoidable. Third, we constructively close this theoretical gap by proving that Stochastic Gradient Ascent (SGA) with averaging achieves the minimax optimal rate Θ(s/N). Finally, we extend our framework to the learning-to-warm-start setting, proving that it achieves a fast, minimax-optimal rate of Θ(s/N) and establishing a theoretical advantage over direct multiplier prediction.

Large Language Models (LLMs) have demonstrated profound impact on Natural Language Processing (NLP) tasks. However, their effective deployment across diverse domains often require domain-specific adaptation strategies, as generic models may underperform when faced with specialized data distributions. Recent advances in prompt engineering (PE) offer a promising alternative to extensive retraining by refining input instructions to align LLM outputs with task objectives. This paradigm has emerged as a rapid and versatile approach for model fine-tuning. Despite its potential, manual prompt design remains labor-intensive and heavily depends on specialized expertise, often requiring iterative human effort to achieve optimal formulations. To address this limitation, automated prompt engineering methodologies have been developed to systematically generate task-specific prompts. However, current implementations predominantly employ static update rules and lack mechanisms for dynamic strategy selection, resulting in suboptimal adaptation to varying NLP task requirements. Furthermore, most methods treat and update the whole prompts at each step, without considering editing prompt sections at a finer granularity. At last, in particular, the problem of how to recycle experience in LLM is still underexplored. To this end, we propose the PromptFlow, a modular training framework inspired by TensorFlow, which integrates meta-prompts, operators, optimization, and evaluator. Our framework can be equipped with the latest optimization methods and autonomously explores optimal prompt refinement trajectories through gradient-based meta-learning, requiring minimal task-specific training data. Specifically, we devise a reinforcement learning method to recycle experience for LLM in the PE process. Finally, we conduct extensive experiments on various datasets, and demonstrate the effectiveness of PromptFlow.

Search agents are often trained as policies over growing transcripts: the model must decide how to search while also remembering what it has seen, which evidence is useful, which constraints remain open, and which claims have actually been checked. We argue that this formulation puts too much routine state management inside the policy: reinforcement learning is forced to optimize both semantic search decisions and recoverable bookkeeping that the environment can maintain more reliably. We introduce Harness-1, a 20B search agent (retrieval subagent) trained with reinforcement learning inside a stateful search harness. The harness maintains environment-side working memory, including a candidate pool, an importance-tagged curated set, compact evidence links, verification records, compressed and deduplicated observations, and budget-aware context rendering. The policy retains the semantic decisions: what to search, which documents to keep or discard, what to verify, and when to stop. Across eight retrieval benchmarks spanning web, finance, patents, and multi-hop QA, Harness-1 achieves 0.730 average curated recall, outperforming the next strongest open search subagent by +11.4 points and remaining competitive with much larger frontier-model searchers. Its gains are especially strong on held-out transfer benchmarks, suggesting that reinforcement learning over explicit search state can produce retrieval behaviors that generalize beyond the training domains. Our code is available at https://github.com/pat-jj/harness-1.

Inverse design refers to the problem of optimizing the input of an objective function in order to enact a target outcome. For many real-world engineering problems, the objective function takes the form of a simulator that predicts how the system state will evolve over time, and the design challenge is to optimize the initial conditions that lead to a target outcome. Recent developments in learned simulation have shown that graph neural networks (GNNs) can be used for accurate, efficient, differentiable estimation of simulator dynamics, and support high-quality design optimization with gradient- or sampling-based optimization procedures. However, optimizing designs from scratch requires many expensive model queries, and these procedures exhibit basic failures on either non-convex or high-dimensional problems.In this work, we show how denoising diffusion models (DDMs) can be used to solve inverse design problems efficiently and propose a particle sampling algorithm for further improving their efficiency. We perform experiments on a number of fluid dynamics design challenges, and find that our approach substantially reduces the number of calls to the simulator compared to standard techniques.

We propose a method that achieves near-optimal rates for smooth stochastic convex optimization and requires essentially no prior knowledge of problem parameters. This improves on prior work which requires knowing at least the initial distance to optimality d0. Our method, U-DoG, combines UniXGrad (Kavis et al., 2019) and DoG (Ivgi et al., 2023) with novel iterate stabilization techniques. It requires only loose bounds on d0 and the noise magnitude, provides high probability guarantees under sub-Gaussian noise, and is also near-optimal in the non-smooth case. Our experiments show consistent, strong performance on convex problems and mixed results on neural network training.

While large and diverse datasets have driven recent advances in large models, identifying the optimal data mixture for pre-training and post-training remains a significant open problem. We address this challenge with FASTMIX, a novel framework that automates data mixture discovery while training only a single proxy model. Instead of relying on predefined heuristics or resource-intensive simulations, FASTMIX jointly optimizes mixture coefficients and model parameters, substantially improving efficiency and scalability over prior approaches. At the core of FASTMIX is a reformulation of mixture selection as a bilevel optimization problem. Under this reformulation, we show that optimizing mixture ratios is mathematically equivalent to assigning per-source loss weights under uniform source sampling. This embeds the mixture coefficients directly into the differentiable iterative optimization objective, enabling efficient, gradient-based optimization of both mixture and model. To solve the optimization problem, FASTMIX implements an approximate iterative optimization procedure, alternating between (i) updating model parameters on data sampled according to current mixture ratios (inner loop) and (ii) updating mixture ratios based on validation feedback (outer loop). Across pre- and post-training, FASTMIX outperforms baselines while drastically reducing search cost. Code (https://github.com/hrtan/fastmix)

While scaling the length of responses at test-time has been shown to markedly improve the reasoning abilities and performance of large language models (LLMs), it often results in verbose outputs and increases inference cost. Prior approaches for efficient test-time scaling, typically using universal budget constraints or query-level length optimization, do not leverage historical information from previous encounters with the same problem during training. We hypothesize that this limits their ability to progressively make solutions more concise over time. To address this, we present History-Aware Policy Optimization (HAPO), which keeps track of a history state (e.g., the minimum length over previously generated correct responses) for each problem. HAPO employs a novel length reward function based on this history state to incentivize the discovery of correct solutions that are more concise than those previously found. Crucially, this reward structure avoids overly penalizing shorter incorrect responses with the goal of facilitating exploration towards more efficient solutions. By combining this length reward with a correctness reward, HAPO jointly optimizes for correctness and efficiency. We use HAPO to train DeepSeek-R1-Distill-Qwen-1.5B, DeepScaleR-1.5B-Preview, and Qwen-2.5-1.5B-Instruct, and evaluate HAPO on several math benchmarks that span various difficulty levels. Experiment results demonstrate that HAPO effectively induces LLMs' concise reasoning abilities, producing length reductions of 33-59% with accuracy drops of only 2-5%.

Inference-time controllable generation is essential for real-world applications of unconditional diffusion models. However, most existing techniques focus on individual samples, struggling in applications that require the sample population to follow specific attribute distributions (e.g., demographic balance or semantic proportions). We formalize this setting as the inference-time attribute distributional alignment problem for pretrained unconditional diffusion models. To address this, we cast inference-time attribute distributional alignment as an optimal control problem over the reverse diffusion process, viewing the process as the rollout of a dynamical system and augmenting it with additive, time-dependent perturbations as control. We solve for the perturbations using an optimal-control-based algorithm to optimize a differentiable distribution-matching objective while penalizing control effort to preserve data fidelity. Experiment results in image generation demonstrate that our proposed plug-and-play approach can better align attribute distributions to diverse and flexible test-time targets compared to baselines, without retraining or finetuning the pretrained diffusion model.

Trust Region Policy Optimization (TRPO) is a popular and empirically successful policy search algorithm in reinforcement learning (RL). It iteratively solved the surrogate problem which restricts consecutive policies to be close to each other. TRPO is an on-policy algorithm. On-policy methods bring many benefits, like the ability to gauge each resulting policy. However, they typically discard all the knowledge about the policies which existed before. In this work, we use a replay buffer to borrow from the off-policy learning setting to TRPO. Entropy regularization is usually used to improve policy optimization in reinforcement learning. It is thought to aid exploration and generalization by encouraging more random policy choices. We add an Entropy regularization term to advantage over π, accumulated over time steps, in TRPO. We call this update EnTRPO. Our experiments demonstrate EnTRPO achieves better performance for controlling a Cart-Pole system compared with the original TRPO

The optimization of long-horizon agents increasingly relies on reflection-based mechanisms, where a large language model (LLM) acts as an optimizer to diagnose agent failures and improve agent policies. However, real execution traces are difficult to use directly for optimization: large trace collections are often redundant and heterogeneous, making optimization inefficient and prone to overfitting to low-value failures; meanwhile, each individual trajectory also contains many irrelevant steps, while naive context reduction methods such as truncation or sliding windows can discard causally important evidence and produce misleading optimization signals. To resolve this dilemma, we introduce STRACE (Structural TRajectory Analysis and Causal Extraction), a framework that constructs high signal-noise optimization contexts for more precise and effective optimization. At the batch level, STRACE mines failure patterns to filter redundant traces and retain representative failures; within each selected trace, it performs causal localization over a textual dependency graph to remove non-causal steps and identify the true root-cause module for optimization. Empirical results demonstrate that STRACE significantly outperforms standard context-filtering baselines. Notably, on a challenging formal verification task (VeruSAGE-Bench), it successfully optimizes human-expert designed agents, delivering 1.4times success-rate improvement (42.5% to 58.5%). The code is available at https://github.com/moomight/STRACE .

Current state-of-the-art solutions for motion capture from a single camera are optimization driven: they optimize the parameters of a 3D human model so that its re-projection matches measurements in the video (e.g. person segmentation, optical flow, keypoint detections etc.). Optimization models are susceptible to local minima. This has been the bottleneck that forced using clean green-screen like backgrounds at capture time, manual initialization, or switching to multiple cameras as input resource. In this work, we propose a learning based motion capture model for single camera input. Instead of optimizing mesh and skeleton parameters directly, our model optimizes neural network weights that predict 3D shape and skeleton configurations given a monocular RGB video. Our model is trained using a combination of strong supervision from synthetic data, and self-supervision from differentiable rendering of (a) skeletal keypoints, (b) dense 3D mesh motion, and (c) human-background segmentation, in an end-to-end framework. Empirically we show our model combines the best of both worlds of supervised learning and test-time optimization: supervised learning initializes the model parameters in the right regime, ensuring good pose and surface initialization at test time, without manual effort. Self-supervision by back-propagating through differentiable rendering allows (unsupervised) adaptation of the model to the test data, and offers much tighter fit than a pretrained fixed model. We show that the proposed model improves with experience and converges to low-error solutions where previous optimization methods fail.

Diffusion models have achieved remarkable success as generative models. However, even a well-trained model can accumulate errors throughout the generation process. These errors become particularly problematic when arbitrary guidance is applied to steer samples toward desired properties, which often breaks sample fidelity. In this paper, we propose a general solution to address the off-manifold phenomenon observed in diffusion models. Our approach leverages a time predictor to estimate deviations from the desired data manifold at each timestep, identifying that a larger time gap is associated with reduced generation quality. We then design a novel guidance mechanism, `Temporal Alignment Guidance' (TAG), attracting the samples back to the desired manifold at every timestep during generation. Through extensive experiments, we demonstrate that TAG consistently produces samples closely aligned with the desired manifold at each timestep, leading to significant improvements in generation quality across various downstream tasks.

Counterfactual Risk Minimization (CRM) is a framework for dealing with the logged bandit feedback problem, where the goal is to improve a logging policy using offline data. In this paper, we explore the case where it is possible to deploy learned policies multiple times and acquire new data. We extend the CRM principle and its theory to this scenario, which we call "Sequential Counterfactual Risk Minimization (SCRM)." We introduce a novel counterfactual estimator and identify conditions that can improve the performance of CRM in terms of excess risk and regret rates, by using an analysis similar to restart strategies in accelerated optimization methods. We also provide an empirical evaluation of our method in both discrete and continuous action settings, and demonstrate the benefits of multiple deployments of CRM.

We revisit the standard perturbation-based approach of Abernethy et al. (2008) in the context of unconstrained Bandit Linear Optimization (uBLO). We show the surprising result that in the unconstrained setting, this approach effectively reduces Bandit Linear Optimization (BLO) to a standard Online Linear Optimization (OLO) problem. Our framework improves on prior work in several ways. First, we derive expected-regret guarantees when our perturbation scheme is combined with comparator-adaptive OLO algorithms, leading to new insights about the impact of different adversarial models on the resulting comparator-adaptive rates. We also extend our analysis to dynamic regret, obtaining the first guarantees with optimal P_T path-length dependencies without prior knowledge of P_T. We then develop the first high-probability guarantees for both static and dynamic regret in uBLO. Finally, we discuss lower bounds on the static regret, and prove the folklore Ω(dT) rate for adversarial linear bandits on the Euclidean ball, which is of independent interest.

Diffusion models achieve strong performance in generative modeling, but their success often relies heavily on classifier-free guidance (CFG), an inference-time heuristic that modifies the sampling trajectory. In theory, diffusion models trained with standard denoising score matching (DSM) should recover the target data distribution, raising two fundamental questions: (i) why is inference-time guidance necessary in practice, and (ii) can its underlying effect be internalized into a principled training objective? In this work, we argue that a key limitation of standard DSM is insufficient inter-class separation. To address this issue, we propose MCLR, an alignment objective that explicitly maximizes inter-class likelihood-ratios during training. Fine-tuning diffusion models with MCLR induces CFG-like improvements under standard sampling, substantially improving guidance-free conditional generation and narrowing the gap to inference-time CFG. Beyond these empirical benefits, we show theoretically that the CFG-guided score is exactly the optimal solution to a sample-adaptive weighted MCLR objective. This result connects CFG to alignment-based objectives, providing a mechanistic interpretation of CFG as an implicit inference-time contrastive alignment procedure.

In this paper, we study a class of composite optimization problems whose objective function is given by the summation of a general smooth and nonsmooth component, together with a relatively simple nonsmooth term. While restart strategies are commonly employed in first-order methods to achieve optimal convergence under strong convexity, they introduce structural complexity and practical overhead, making algorithm design and nesting cumbersome. To address this, we propose a restart-free stochastic gradient sliding algorithm that eliminates the need for explicit restart phases when the simple nonsmooth component is strongly convex. Through a novel and carefully designed parameter selection strategy, we prove that the proposed algorithm achieves an ε-solution with only O(log(1ε)) gradient evaluations for the smooth component and O(1ε) stochastic subgradient evaluations for the nonsmooth component, matching the optimal complexity of existing multi-phase (restart-based) methods. Moreover, for the case where the nonsmooth component is structured, allowing the overall problem to be reformulated as a bilinear saddle-point problem, we develop a restart-free accelerated stochastic gradient sliding algorithm. We show that the resulting method requires only O(log(1ε)) gradient computations for the smooth component while preserving an overall iteration complexity of O(1{sqrtε}) for solving the corresponding saddle-point problems. Our work thus provides simpler, restart-f

Research in Curriculum Learning has shown better performance on the task by optimizing the sequence of the training data. Recent works have focused on using complex reinforcement learning techniques to find the optimal data ordering strategy to maximize learning for a given network. In this paper, we present a simple yet efficient technique based on continuous optimization trained with auto-encoding procedure. We call this new approach Training Sequence Optimization (TSO). With a usual encoder-decoder setup we try to learn the latent space continuous representation of the training strategy and a predictor network is used on the continuous representation to predict the accuracy of the strategy on the fixed network architecture. The performance predictor and encoder enable us to perform gradient-based optimization by gradually moving towards the latent space representation of training data ordering with potentially better accuracy. We show an empirical gain of 2AP with our generated optimal curriculum strategy over the random strategy using the CIFAR-100 and CIFAR-10 datasets and have better boosts than the existing state-of-the-art CL algorithms.

Pre-trained vision-language models, such as CLIP, show impressive zero-shot recognition ability and can be easily transferred to specific downstream tasks via prompt tuning, even with limited training data. However, existing prompt tuning methods face two main challenges: (1) In few-shot scenarios, data scarcity often leads to overfitting, making the model sensitive to changes in the input domain. (2) To mitigate overfitting, these methods typically rely on complex task-specific model architectures and sensitive hyperparameter tuning, severely restricting their general applicability. To address these issues, we propose a simpler and more general framework called GLAD (Generalizable LoRA tuning with RegulArized GraDient). We show that merely applying LoRA achieves performance in downstream tasks comparable to current state-of-the-art prompt-based methods. While LoRA is effective and easy to use, it remains susceptible to overfitting in few-shot learning scenarios. To mitigate this risk, we introduce a gradient-based regularization technique. This technique effectively steers the optimization trajectory, encouraging the model to find a more stable parameter region that is robust to variations in data distribution. Through extensive experiments conducted on 15 benchmark datasets, we demonstrate that GLAD outperforms previous tuning approaches in terms of base-to-novel class generalization, image domain generalization, and cross-dataset generalization. The code will be publicly available.

We consider function optimization as a sequential decision making problem under budget constraint. This constraint limits the number of objective function evaluations allowed during the optimization. We consider an algorithm inspired by a continuous version of a multi-armed bandit problem which attacks this optimization problem by solving the tradeoff between exploration (initial quasi-uniform search of the domain) and exploitation (local optimization around the potentially global maxima). We introduce the so-called Simultaneous Optimistic Optimization (SOO), a deterministic algorithm that works by domain partitioning. The benefit of such approach are the guarantees on the returned solution and the numerical efficiency of the algorithm. We present this machine learning approach to optimization, and provide the empirical assessment of SOO on the CEC'2014 competition on single objective real-parameter numerical optimization test-suite.

Enterprise large language model (LLM) applications often begin as prototypes whose behavior is carried by prompts and retrieval context. Productization adds requirements for source boundaries, entity routing, answer contracts, and reproducible traces. We present a harness-engineering approach that reconstructs this pattern into a traceable, auditable LLM-agent architecture: deterministic behavior moves into code, manifests, schemas, and validation artifacts around a replaceable composition boundary, while source-backed claims remain the authority for runtime answers. We instantiate it on a public-data slice of five Korean corporate groups (25 listed companies) and evaluate three research questions. (1) The harness preserves its source-grounding, entity-routing, trace, output-hygiene, and recommendation-language contracts across the fixed validation scenarios; a fault-injection control confirms the validators flag deliberately broken contracts. (2) The checks the harness enforces held under model substitution: across three hosted models, they passed on all 270 composition-boundary runs; failures were confined to the model-composed side and were caught and recorded. (3) The code-owned guarantees are load-bearing, not reproducible by prompting alone: holding the model fixed and varying only the enforcement layer, prompt instructions alone let recommendation-language and internal-trace-leakage violations reach the reader, which the harness blocks entirely. A bolt-on external guardrail prevents such violations too but over-refuses, dropping utility to 88/120 where the harness preserves full utility (120/120); in this ablation, only code-owned enforcement preserves both safety and utility. The result is a reusable engineering pattern for turning exploratory prototypes into auditable applications with versioned source, control, and validation artifacts.

Most downstream adaptation methods tune all or part of the parameters of pre-trained models (PTMs) through gradient descent, where the tuning cost increases linearly with the growth of the model size. By contrast, gradient-free methods only require the forward computation of the PTM to tune the prompt, retaining the benefits of efficient tuning and deployment. Though, past work on gradient-free tuning often introduces gradient descent to seek a good initialization of prompt and lacks versatility across tasks and PTMs. In this paper, we present BBTv2, an improved version of Black-Box Tuning, to drive PTMs for few-shot learning. We prepend continuous prompts to every layer of the PTM and propose a divide-and-conquer gradient-free algorithm to optimize the prompts at different layers alternately. Extensive experiments across various tasks and PTMs show that BBTv2 can achieve comparable performance to full model tuning and state-of-the-art parameter-efficient methods (e.g., Adapter, LoRA, BitFit, etc.) under few-shot settings while maintaining much fewer tunable parameters.

Classifier-free guidance (CFG) is a cornerstone of text-to-image diffusion models, yet its effectiveness is limited by the use of static guidance scales. This "one-size-fits-all" approach fails to adapt to the diverse requirements of different prompts; moreover, prior solutions like gradient-based correction or fixed heuristic schedules introduce additional complexities and fail to generalize. In this work, we challeng this static paradigm by introducing a framework for dynamic CFG scheduling. Our method leverages online feedback from a suite of general-purpose and specialized small-scale latent-space evaluations, such as CLIP for alignment, a discriminator for fidelity and a human preference reward model, to assess generation quality at each step of the reverse diffusion process. Based on this feedback, we perform a greedy search to select the optimal CFG scale for each timestep, creating a unique guidance schedule tailored to every prompt and sample. We demonstrate the effectiveness of our approach on both small-scale models and the state-of-the-art Imagen 3, showing significant improvements in text alignment, visual quality, text rendering and numerical reasoning. Notably, when compared against the default Imagen 3 baseline, our method achieves up to 53.8% human preference win-rate for overall preference, a figure that increases up to to 55.5% on prompts targeting specific capabilities like text rendering. Our work establishes that the optimal guidance schedule is inherently dynamic and prompt-dependent, and provides an efficient and generalizable framework to achieve it.

This paper formalizes an emerging learning paradigm that uses a trained model as a reference to guide and enhance the training of a target model through strategic data selection or weighting, named model steering. While ad-hoc methods have been used in various contexts, including the training of large foundation models, its underlying principles remain insufficiently understood, leading to sub-optimal performance. In this work, we propose a theory-driven framework for model steering called DRRho risk minimization, which is rooted in Distributionally Robust Optimization (DRO). Through a generalization analysis, we provide theoretical insights into why this approach improves generalization and data efficiency compared to training without a reference model. To the best of our knowledge, this is the first time such theoretical insights are provided for the new learning paradigm, which significantly enhance our understanding and practice of model steering. Building on these insights and the connection between contrastive learning and DRO, we introduce a novel method for Contrastive Language-Image Pretraining (CLIP) with a reference model, termed DRRho-CLIP. Extensive experiments validate the theoretical insights, reveal a superior scaling law compared to CLIP without a reference model, and demonstrate its strength over existing heuristic approaches.

Agent harnesses -- the stateful programs that wrap a language model and decide what it sees at each step -- are now known to change end-to-end performance on a fixed model by as much as six times. That raises a question asked less often than it should be: how much of an agent's competence does the harness itself already carry, and how much genuinely still needs the LLM? We externalize a planning harness for noisy Collaborative Battleship into four progressively richer layers -- posterior belief tracking, declarative planning, symbolic reflec tion, and an LLM-backed revision gate -- under a common runtime, taking win rate as the primary metric and F1 as secondary, and pre-specifying heavy lifting as the single largest positive marginal to the primary metric. Across 54 games, declarative pla nning carries the heavy lifting (+24.1pp win rate over a belief-only harness, zero LLM calls); symbolic reflection is mechanistically real but calibration-sensitive, with signed board-level effects up to pm0.140 F1 that cancel on aggregate; and LLM-backed revision ac tivates on only 4.3% of turns with a bounded, non-monotonic effect. The contribution is methodological: once harness layers are made externally measurable, the LLM's role can be quantified as residual rather than assumed central.

Self-improving AI agents are designed to learn from their mistakes. We show they can also hallucinate mistakes that never happened. We study this failure mode in automated harness optimization, where an LLM-based proposer edits an agent's scaffold, including prompts, parsers, filters, validators and guardrails, to eliminate observed failures. But this process rarely asks first: was there a real failure to fix? We introduce the Counterfactual Fabrication Lab, a deterministic micro-lab where the correct action is known: do nothing. The lab plants a candidate guardrail for a failure class that provably never occurs, presents only legal episodes, and uses a byte-exact oracle to check every cited violation. The proposer behaves as expected on real violations and abstains on featureless legal input. Yet when the legal input contains a harmless pattern resembling a familiar game rule, it invents a failure: in 15/60 runs, versus 0/60 on featureless input, it enables the nonexistent-rule guardrail and cites a violation the oracle refutes. The effect is structured, not indiscriminate. In single-shot proposals it appears only when three conditions coincide: a rule-shaped pattern, an open-ended rule set and an instruction that presupposes failures. Removing any of these conditions eliminates the fabrication. Because the invented guardrail changes no true outcome and cannot improve an already-perfect suppression score, the phenomenon is neither reward hacking nor over-refusal. It is a phantom guardrail: a fix for a failure that never happened, invisible to suppression-only acceptance. Inside an add-only accept loop it re-enters even without the failure-presupposing instruction, the loop's keep-adding role supplying the demand the instruction supplied in single shot, and once in it stays. We present the Counterfactual Fabrication Lab for measuring fabricated failures in self-improving agent harnesses.

Generative AI models have made significant progress in automating the creation of 3D shapes, which has the potential to transform car design. In engineering design and optimization, evaluating engineering metrics is crucial. To make generative models performance-aware and enable them to create high-performing designs, surrogate modeling of these metrics is necessary. However, the currently used representations of three-dimensional (3D) shapes either require extensive computational resources to learn or suffer from significant information loss, which impairs their effectiveness in surrogate modeling. To address this issue, we propose a new two-dimensional (2D) representation of 3D shapes. We develop a surrogate drag model based on this representation to verify its effectiveness in predicting 3D car drag. We construct a diverse dataset of 9,070 high-quality 3D car meshes labeled by drag coefficients computed from computational fluid dynamics (CFD) simulations to train our model. Our experiments demonstrate that our model can accurately and efficiently evaluate drag coefficients with an R^2 value above 0.84 for various car categories. Moreover, the proposed representation method can be generalized to many other product categories beyond cars. Our model is implemented using deep neural networks, making it compatible with recent AI image generation tools (such as Stable Diffusion) and a significant step towards the automatic generation of drag-optimized car designs. We have made the dataset and code publicly available at https://decode.mit.edu/projects/dragprediction/.

Mixture-of-Experts (MoE) architectures in Large Language Models (LLMs) have significantly reduced inference costs through sparse activation. However, this sparse activation paradigm also introduces new safety challenges. Since only a subset of experts is engaged for each input, model behavior becomes coupled to routing decisions, yielding a difficult-to-control mechanism that can vary across safety-relevant scenarios. At the same time, adapting model behavior through full fine-tuning or retraining is costly, especially when developers need to rapidly configure the same model for different safety objectives. We present MASCing (MoE Activation Steering Configuration), the first framework that enables flexible reconfiguration of MoE behavior across diverse safety scenarios without retraining. MASCing uses an LSTM-based surrogate model to capture cross-layer routing dependencies and map routing logits to downstream behaviors. It then optimizes a steering matrix to identify behavior-relevant expert circuits and, at inference time, applies steering masks to the routing gates to override expert selection. This enables targeted enhancement or suppression of specific behaviors while preserving general language utility. To demonstrate its reconfigurability, we apply MASCing to two different safety-related objectives and observe consistent gains with negligible overhead across seven open-source MoE models. For multi-turn jailbreak defense, it improves the average defense success rate from 52.5% to 83.9%, with gains of up to 89.2%. For adult-content generation, MASCing enables models to comply with such requests that would otherwise be refused, increasing the average generation success rate from 52.6% to 82.0%, with gains of up to 93.0%. These results establish MASCing as a practical, lightweight, and flexible framework for scenario-specific safety reconfiguration in MoE models.

We introduce Feasible Learning (FL), a sample-centric learning paradigm where models are trained by solving a feasibility problem that bounds the loss for each training sample. In contrast to the ubiquitous Empirical Risk Minimization (ERM) framework, which optimizes for average performance, FL demands satisfactory performance on every individual data point. Since any model that meets the prescribed performance threshold is a valid FL solution, the choice of optimization algorithm and its dynamics play a crucial role in shaping the properties of the resulting solutions. In particular, we study a primal-dual approach which dynamically re-weights the importance of each sample during training. To address the challenge of setting a meaningful threshold in practice, we introduce a relaxation of FL that incorporates slack variables of minimal norm. Our empirical analysis, spanning image classification, age regression, and preference optimization in large language models, demonstrates that models trained via FL can learn from data while displaying improved tail behavior compared to ERM, with only a marginal impact on average performance.

Recent research explores optimization using large language models (LLMs) by either iteratively seeking next-step solutions from LLMs or directly prompting LLMs for an optimizer. However, these approaches exhibit inherent limitations, including low operational efficiency, high sensitivity to prompt design, and a lack of domain-specific knowledge. We introduce LLaMoCo, the first instruction-tuning framework designed to adapt LLMs for solving optimization problems in a code-to-code manner. Specifically, we establish a comprehensive instruction set containing well-described problem prompts and effective optimization codes. We then develop a novel two-phase learning strategy that incorporates a contrastive learning-based warm-up procedure before the instruction-tuning phase to enhance the convergence behavior during model fine-tuning. The experiment results demonstrate that a CodeGen (350M) model fine-tuned by our LLaMoCo achieves superior optimization performance compared to GPT-4 Turbo and the other competitors across both synthetic and realistic problem sets. The fine-tuned model and the usage instructions are available at https://anonymous.4open.science/r/LLaMoCo-722A.

Learned optimizers have been an active research topic over the past decade, with increasing progress toward practical, general-purpose optimizers that can serve as drop-in replacements for widely used methods like Adam. However, recent advances -- such as VeLO, which was meta-trained for 4000 TPU-months -- remain largely inaccessible to the broader community, in part due to their reliance on JAX and the absence of user-friendly packages for applying the optimizers after meta-training. To address this gap, we introduce PyLO, a PyTorch-based library that brings learned optimizers to the broader machine learning community through familiar, widely adopted workflows. Unlike prior work focused on synthetic or convex tasks, our emphasis is on applying learned optimization to real-world large-scale pre-training tasks. Our release includes a CUDA-accelerated version of the small_fc_lopt learned optimizer architecture from (Metz et al., 2022a), delivering substantial speedups -- from 39.36 to 205.59 samples/sec throughput for training ViT B/16 with batch size 32. PyLO also allows us to easily combine learned optimizers with existing optimization tools such as learning rate schedules and weight decay. When doing so, we find that learned optimizers can substantially benefit. Our code is available at https://github.com/Belilovsky-Lab/pylo

Aligning text-to-image diffusion model (T2I) with preference has been gaining increasing research attention. While prior works exist on directly optimizing T2I by preference data, these methods are developed under the bandit assumption of a latent reward on the entire diffusion reverse chain, while ignoring the sequential nature of the generation process. From literature, this may harm the efficacy and efficiency of alignment. In this paper, we take on a finer dense reward perspective and derive a tractable alignment objective that emphasizes the initial steps of the T2I reverse chain. In particular, we introduce temporal discounting into the DPO-style explicit-reward-free loss, to break the temporal symmetry therein and suit the T2I generation hierarchy. In experiments on single and multiple prompt generation, our method is competitive with strong relevant baselines, both quantitatively and qualitatively. Further studies are conducted to illustrate the insight of our approach.

Heterogeneous model fusion enhances the performance of LLMs by integrating the knowledge and capabilities of multiple structurally diverse models. However, existing approaches often rely solely on selecting the best output for each prompt from source models, which underutilizes their full potential due to limited source knowledge and results in sparse optimization signals. To address this limitation, we propose FuseRL, a novel two-stage framework comprising FuseSFT and FusePO to maximize the utilization of source LLMs. FuseSFT establishes a robust initialization by integrating the strengths of heterogeneous source models through weighted supervised fine-tuning (SFT) on diverse outputs for each prompt. FusePO optimizes weighted preferences based on the outputs of multiple source models to enable superior alignment performance. Extensive experiments demonstrate the effectiveness of our framework across various preference alignment methods, including RLOO, DPO, and SimPO. Using Llama-3.1-8B-Instruct as the target model, our approach achieves state-of-the-art performance among 8B LLMs on the AlpacaEval-2 and Arena-Hard benchmarks. Further analysis suggests that FuseSFT regularizes the training process to reduce overfitting, while FusePO introduces dense and diverse signals for preference optimization.

Reinforcement Learning with Verifiable Rewards (RLVR) has become a central post-training paradigm for improving the reasoning capabilities of large language models. Yet existing methods share a common blind spot: they optimize policies based on instantaneous group-level or batch-level statistics without ever verifying whether the resulting update actually improved the model. This open-loop design -- updating in isolation at each step, guided only by within-group (batch) reward signals -- means optimization can drift or collapse with no mechanism to detect and correct these failures. We argue that the missing ingredient is policy improvement feedback: the ability to measure and optimize inter-iteration progress directly. To this end, we introduce Policy Improvement Reinforcement Learning (PIRL), a framework that replaces surrogate reward maximization with the explicit objective of maximizing cumulative policy improvement across iterations, and prove this temporal objective is perfectly aligned with maximizing final task performance. Building on PIRL, we propose Policy Improvement Policy Optimization (PIPO), which implements closed-loop optimization through retrospective verification. At each iteration, PIPO evaluates whether the previous update yielded genuine improvement against a sliding-window historical baseline, then actively reinforces beneficial updates and suppresses the harmful ones -- transforming an open-loop process into a self-correcting one. We provide theoretical analysis showing that PIPO performs ascent on the PIRL objective in expectation, and experiments on mathematical reasoning benchmarks demonstrate improved stability and performance over GRPO and its variants.

The remarkable success of diffusion and flow-matching models has ignited a surge of works on adapting them at test time for controlled generation tasks. Examples range from image editing to restoration, compression and personalization. However, due to the iterative nature of the sampling process in those models, it is computationally impractical to use gradient-based optimization to directly control the image generated at the end of the process. As a result, existing methods typically resort to manipulating each timestep separately. Here we introduce FlowOpt - a zero-order (gradient-free) optimization framework that treats the entire flow process as a black box, enabling optimization through the whole sampling path without backpropagation through the model. Our method is both highly efficient and allows users to monitor the intermediate optimization results and perform early stopping if desired. We prove a sufficient condition on FlowOpt's step-size, under which convergence to the global optimum is guaranteed. We further show how to empirically estimate this upper bound so as to choose an appropriate step-size. We demonstrate how FlowOpt can be used for image editing, showcasing two options: (i) inversion (determining the initial noise that generates a given image), and (ii) directly steering the edited image to be similar to the source image while conforming to a target text prompt. In both cases, FlowOpt achieves state-of-the-art results while using roughly the same number of neural function evaluations (NFEs) as existing methods. Code and examples are available on the project's webpage.

Most 3D object generators focus on aesthetic quality, often neglecting physical constraints necessary in applications. One such constraint is that the 3D object should be self-supporting, i.e., remains balanced under gravity. Prior approaches to generating stable 3D objects used differentiable physics simulators to optimize geometry at test-time, which is slow, unstable, and prone to local optima. Inspired by the literature on aligning generative models to external feedback, we propose Direct Simulation Optimization (DSO), a framework to use the feedback from a (non-differentiable) simulator to increase the likelihood that the 3D generator outputs stable 3D objects directly. We construct a dataset of 3D objects labeled with a stability score obtained from the physics simulator. We can then fine-tune the 3D generator using the stability score as the alignment metric, via direct preference optimization (DPO) or direct reward optimization (DRO), a novel objective, which we introduce, to align diffusion models without requiring pairwise preferences. Our experiments show that the fine-tuned feed-forward generator, using either DPO or DRO objective, is much faster and more likely to produce stable objects than test-time optimization. Notably, the DSO framework works even without any ground-truth 3D objects for training, allowing the 3D generator to self-improve by automatically collecting simulation feedback on its own outputs.

While prompt engineering is instrumental in maximizing the capabilities of Large Language Models (LLMs) during inference, the role of prompts during training remains critically underexplored. Prevailing fine-tuning paradigms typically treat training prompts as mere surface forms, assuming that semantically equivalent instructions yield identical learning outcomes. However, we reveal that this equivalence is deceptive: while paraphrased prompts often lead to comparable in-task performance, they induce drastically different cross-task impacts regarding catastrophic forgetting and generalization. Crucially, these impacts are positively correlated across tasks, indicating the existence of superior prompts that consistently yield better performance. Furthermore, we discover that these superior prompts can be robustly identified by task loss prior to learning. Leveraging these insights, we introduce State-Adaptive Prompt Optimization (SAPO), a lightweight yet effective training strategy that shifts task formulation from a static input to a dynamic, state-adaptive variable. Comprehensive experiments on diverse benchmarks confirm its effectiveness, which significantly mitigates forgetting while improving generalization, achieving substantial performance gains over state-of-the-art methods. These results provide insights into how training prompts shape learning dynamics and offer a practical recipe for robust fine-tuning. Our code is available at https://github.com/Eric8932/SAPO.

Pretraining optimizers are tuned to produce the strongest possible base model, on the assumption that a stronger starting point yields a stronger model after subsequent changes like post-training and quantization. This overlooks the geometry of the base model which controls how much of the base model's capabilities survive subsequent parameter updates. We study three pretraining optimization approaches that bias optimization toward flatter minima: Sharpness-Aware Minimization (SAM), large learning rates, and shortened learning rate annealing periods. Across model sizes ranging from 20M to 150M parameters, we find that these interventions consistently improve downstream performance after post-training on five common datasets with up to 80% less forgetting. These principles hold at scale: a short SAM mid-training phase applied to an existing OLMo-2-1B checkpoint reduces forgetting by 31% after MetaMath post-training and by 40% after 4-bit quantization.

Controlling emergent behavioral personas (e.g., sycophancy, hallucination) in Large Language Models (LLMs) is critical for AI safety, yet remains a persistent challenge. Existing solutions face a dilemma: manual prompt engineering is intuitive but unscalable and imprecise, while automatic optimization methods are effective but operate as "black boxes" with no interpretable connection to model internals. We propose a novel framework that adapts gradient ascent to LLMs, enabling targeted prompt discovery. In specific, we propose two methods, RESGA and SAEGA, that both optimize randomly initialized prompts to achieve better aligned representation with an identified persona direction. We introduce fluent gradient ascent to control the fluency of discovered persona steering prompts. We demonstrate RESGA and SAEGA's effectiveness across Llama 3.1, Qwen 2.5, and Gemma 3 for steering three different personas, sycophancy, hallucination, and myopic reward. Crucially, on sycophancy, our automatically discovered prompts achieve significant improvement (49.90% compared with 79.24%). By grounding prompt discovery in mechanistically meaningful features, our method offers a new paradigm for controllable and interpretable behavior modification.

As language models (LMs) are increasingly adopted across domains, high-quality benchmarking frameworks that accurately estimate performance are essential for guiding deployment decisions. While frameworks such as Holistic Evaluation of Language Models (HELM) enable broad evaluation across tasks, they often rely on fixed prompts that fail to generalize across LMs, yielding unrepresentative performance estimates. Unless we approximate each LM's ceiling (maximum achievable via changes to the prompt), we risk underestimating performance. Declarative prompting frameworks, such as DSPy, offer a scalable alternative to manual prompt engineering by crafting structured prompts that can be optimized per task. However, such frameworks have not been systematically evaluated across established benchmarks. We present a reproducible DSPy+HELM framework that introduces structured prompting methods which elicit reasoning, enabling more accurate LM benchmarking. Using four prompting methods, we evaluate four frontier LMs across seven benchmarks (general/medical domain) against existing HELM baseline scores. We find that without structured prompting: (i) HELM underestimates LM performance (by 4% average), (ii) performance estimates vary more across benchmarks (+2% standard deviation), (iii) performance gaps are misrepresented (leaderboard rankings flip on 3/7 benchmarks), and (iv) introducing chain-of-thought reduces LM sensitivity to prompt design (smaller Δ across prompts). To our knowledge, this is the first benchmarking study to systematically integrate structured prompting into an established evaluation framework, demonstrating how scalable performance-ceiling approximation yields more robust, decision-useful benchmarks. We open-source (i) DSPy+HELM Integration (https://github.com/stanford-crfm/helm/pull/3893) and (ii) Prompt Optimization Pipeline (https://github.com/StanfordMIMI/dspy-helm).

Catastrophic forgetting remains a central obstacle for continual learning in neural models. Popular approaches -- replay and elastic weight consolidation (EWC) -- have limitations: replay requires a strong generator and is prone to distributional drift, while EWC implicitly assumes a shared optimum across tasks and typically uses a diagonal Fisher approximation. In this work, we study the gradient geometry of diffusion models, which can already produce high-quality replay data. We provide theoretical and empirical evidence that, in the low signal-to-noise ratio (SNR) regime, per-sample gradients become strongly collinear, yielding an empirical Fisher that is effectively rank-1 and aligned with the mean gradient. Leveraging this structure, we propose a rank-1 variant of EWC that is as cheap as the diagonal approximation yet captures the dominant curvature direction. We pair this penalty with a replay-based approach to encourage parameter sharing across tasks while mitigating drift. On class-incremental image generation datasets (MNIST, FashionMNIST, CIFAR-10, ImageNet-1k), our method consistently improves average FID and reduces forgetting relative to replay-only and diagonal-EWC baselines. In particular, forgetting is nearly eliminated on MNIST and FashionMNIST and is more than halved on ImageNet-1k. These results suggest that diffusion models admit an approximately rank-1 Fisher. With a better Fisher estimate, EWC becomes a strong complement to replay: replay encourages parameter sharing across tasks, while EWC effectively constrains replay-induced drift.

Many optimization problems are inherently multi-objective. To address them, we formalize Jacobian descent (JD), a direct generalization of gradient descent for vector-valued functions. Each step of this algorithm relies on a Jacobian matrix consisting of one gradient per objective. The aggregator, responsible for reducing this matrix into an update vector, characterizes JD. While the multi-task learning literature already contains a variety of aggregators, they often lack some natural properties. In particular, the update should not conflict with any objective and should scale proportionally to the norm of each gradient. We propose a new aggregator specifically designed to satisfy this. Emphasizing conflict between objectives, we then highlight direct applications for our methods. Most notably, we introduce instance-wise risk minimization (IWRM), a learning paradigm in which the loss of each training example is considered a separate objective. On simple image classification tasks, IWRM exhibits promising results compared to the direct minimization of the average loss. The performance of our aggregator in those experiments also corroborates our theoretical findings. Lastly, as speed is the main limitation of JD, we provide a path towards a more efficient implementation.

Timestep sampling p(t) is a central design choice in Flow Matching models, yet common practice increasingly favors static middle-biased distributions (e.g., Logit-Normal). We show that this choice induces a speed--quality trade-off: middle-biased sampling accelerates early convergence but yields worse asymptotic fidelity than Uniform sampling. By analyzing per-timestep training losses, we identify a U-shaped difficulty profile with persistent errors near the boundary regimes, implying that under-sampling the endpoints leaves fine details unresolved. Guided by this insight, we propose Curriculum Sampling, a two-phase schedule that begins with middle-biased sampling for rapid structure learning and then switches to Uniform sampling for boundary refinement. On CIFAR-10, Curriculum Sampling improves the best FID from 3.85 (Uniform) to 3.22 while reaching peak performance at 100k rather than 150k training steps. Our results highlight that timestep sampling should be treated as an evolving curriculum rather than a fixed hyperparameter.

Prompt engineering is a challenging and important task due to the high sensitivity of Large Language Models (LLMs) to the given prompt and the inherent ambiguity of a textual task instruction. Automatic prompt engineering is essential to achieve optimized performance from LLMs. Recent studies have demonstrated the capabilities of LLMs to automatically conduct prompt engineering by employing a meta-prompt that incorporates the outcomes of the last trials and proposes an improved prompt. However, this requires a high-quality benchmark to compare different prompts, which is difficult and expensive to acquire in many real-world use cases. In this work, we introduce a new method for automatic prompt engineering, using a calibration process that iteratively refines the prompt to the user intent. During the optimization process, the system jointly generates synthetic data of boundary use cases and optimizes the prompt according to the generated dataset. We demonstrate the effectiveness of our method with respect to strong proprietary models on real-world tasks such as moderation and generation. Our method outperforms state-of-the-art methods with a limited number of annotated samples. Furthermore, we validate the advantages of each one of the system's key components. Our system is built in a modular way, facilitating easy adaptation to other tasks. The code is available https://github.com/Eladlev/AutoPrompt{here}.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

First-order optimization (FOO) algorithms are pivotal in numerous computational domains such as machine learning and signal denoising. However, their application to complex tasks like neural network training often entails significant inefficiencies due to the need for many sequential iterations for convergence. In response, we introduce first-order optimization expedited with approximately parallelized iterations (OptEx), the first framework that enhances the efficiency of FOO by leveraging parallel computing to mitigate its iterative bottleneck. OptEx employs kernelized gradient estimation to make use of gradient history for future gradient prediction, enabling parallelization of iterations -- a strategy once considered impractical because of the inherent iterative dependency in FOO. We provide theoretical guarantees for the reliability of our kernelized gradient estimation and the iteration complexity of SGD-based OptEx, confirming that estimation errors diminish to zero as historical gradients accumulate and that SGD-based OptEx enjoys an effective acceleration rate of Omega(N) over standard SGD given parallelism of N. We also use extensive empirical studies, including synthetic functions, reinforcement learning tasks, and neural network training across various datasets, to underscore the substantial efficiency improvements achieved by OptEx.

This paper studies online nonstochastic control problems with adversarial and static constraints. We propose online nonstochastic control algorithms that achieve both sublinear regret and sublinear adversarial constraint violation while keeping static constraint violation minimal against the optimal constrained linear control policy in hindsight. To establish the results, we introduce an online convex optimization with memory framework under adversarial and static constraints, which serves as a subroutine for the constrained online nonstochastic control algorithms. This subroutine also achieves the state-of-the-art regret and constraint violation bounds for constrained online convex optimization problems, which is of independent interest. Our experiments demonstrate the proposed control algorithms are adaptive to adversarial constraints and achieve smaller cumulative costs and violations. Moreover, our algorithms are less conservative and achieve significantly smaller cumulative costs than the state-of-the-art algorithm.

Prompt engineering is effective but labor-intensive, motivating automated optimization methods. Existing methods typically require labeled datasets, which are often unavailable, and produce verbose, repetitive prompts. We introduce PrefPO, a minimal prompt optimization approach inspired by reinforcement learning from human feedback (RLHF). Its preference-based approach reduces the need for labeled data and hyperparameter tuning-only a starting prompt and natural language criteria are needed. PrefPO uses an LLM discriminator to express pairwise preferences over model outputs and provide feedback to an LLM optimizer, iteratively improving performance. We evaluate PrefPO on 9 BIG-Bench Hard (BBH) tasks and IFEval-Hard, a newly-curated, challenging subset of IFEval. PrefPO matches or exceeds SOTA methods, including GEPA, MIPRO, and TextGrad, on 6/9 tasks and performs comparably to TextGrad on IFEval-Hard (82.4% vs 84.5%). Unlike other methods, PrefPO can optimize in both labeled and unlabeled settings. Without labels, PrefPO closely matches its labeled performance on 6/9 tasks, proving effective without ground truth. PrefPO also improves prompt hygiene: we find existing methods produce prompts 14.7x their original length or with 34% repetitive content; PrefPO reduces these issues by 3-5x. Furthermore, both LLM and human judges rate PrefPO's prompts higher than TextGrad's. Finally, we identify prompt hacking in prompt optimizers, where methods game evaluation criteria, and find PrefPO is susceptible at half the rate of TextGrad (37% vs 86%), generating fewer brittle, misaligned prompts.

While large-scale text-to-image generative models have achieved unprecedented visual performance, their inherent reliance on multi-step iterative solvers incurs severe inference latency. Few-step distillation targeting the Classifier-Free Guidance (CFG) trajectory has emerged as the prevalent dual-dimensional compression paradigm. However, existing frameworks remain subjugated by a coarse-grained blind injection paradigm that perpetually enforces a globally static guidance strength while indiscriminately sampling the supervisor timestep. This state-agnostic design completely disregards the intrinsic nature of image generation as a dynamic evolutionary process characterized by progressive entropy reduction, which not only restricts the performance boundary of few-step compression but also precipitates severe CFG over-conditioning artifacts. To transcend these limitations, we re-examine the distillation procedure through the theoretical lens of Information Theory, formally modeling it as a dynamic mutual information game constrained by the Information Bottleneck (IB) principle. Specifically, we dismantle traditional blind assumptions via a dual-track adaptive framework. To determine the injection target, we propose an instance-aware selection mechanism that transmutes the intractable KL divergence constraint into a zero-overhead closed-form solution predicated on the local vector field norm. To regulate the injection strength, we introduce an entropy-aware schedule that dynamically decays alongside the SNR, applying maximal thrust for initial structural anchoring before smoothly reverting to the natural manifold to refine micro-details. Extensive empirical evaluations corroborate that our framework fundamentally eradicates over-conditioning artifacts, shattering the performance ceiling to achieve SOTA generative fidelity under extremely stringent 2-step configurations.

While Experience Replay - the practice of storing rollouts and reusing them multiple times during training - is a foundational technique in general RL, it remains largely unexplored in LLM post-training due to the prevailing belief that fresh, on-policy data is essential for high performance. In this work, we challenge this assumption. We present a systematic study of replay buffers for LLM post-training, formalizing the optimal design as a trade-off between staleness-induced variance, sample diversity and the high computational cost of generation. We show that strict on-policy sampling is suboptimal when generation is expensive. Empirically, we show that a well-designed replay buffer can drastically reduce inference compute without degrading - and in some cases even improving - final model performance, while preserving policy entropy.

Existing evaluation paradigms for Autonomous Vehicles (AVs) face critical limitations. Real-world evaluation is often challenging due to safety concerns and a lack of reproducibility, whereas closed-loop simulation can face insufficient realism or high computational costs. Open-loop evaluation, while being efficient and data-driven, relies on metrics that generally overlook compounding errors. In this paper, we propose pseudo-simulation, a novel paradigm that addresses these limitations. Pseudo-simulation operates on real datasets, similar to open-loop evaluation, but augments them with synthetic observations generated prior to evaluation using 3D Gaussian Splatting. Our key idea is to approximate potential future states the AV might encounter by generating a diverse set of observations that vary in position, heading, and speed. Our method then assigns a higher importance to synthetic observations that best match the AV's likely behavior using a novel proximity-based weighting scheme. This enables evaluating error recovery and the mitigation of causal confusion, as in closed-loop benchmarks, without requiring sequential interactive simulation. We show that pseudo-simulation is better correlated with closed-loop simulations (R^2=0.8) than the best existing open-loop approach (R^2=0.7). We also establish a public leaderboard for the community to benchmark new methodologies with pseudo-simulation. Our code is available at https://github.com/autonomousvision/navsim.

Aligning text-to-image flow matching models with human preferences via direct reward backpropagation is sample-efficient but hampered by two well-known pathologies: activations cannot be stored across the full sampling trajectory at modern model scale, and chained Jacobian products across steps inflate the reward gradient as it travels back to early indices. Connector-based methods, such as LeapAlign, address these issues by replacing the full backward trajectory with a short pinned path, highlighting a useful decoupling between sampling and optimization. However, the quality of the resulting gradient depends on how accurately this short path approximates the full rollout, especially over long intervals. We propose FlowBP, a unified surrogate-trajectory framework that treats the backward trajectory itself as the design object. FlowBP keeps a no-gradient cached rollout for sampling, then builds a lightweight backward surrogate from cached and selectively re-forwarded velocities. This view separates four choices: the reward-model input, active set, integration weights, and bridge coupling, and recovers prior direct-gradient methods as particular settings. Within this framework, we instantiate three variants: FlowBP-Sparse uses sparse Euler reconstruction, FlowBP-Bridge adds controlled bridge coupling, and FlowBP-Lagrange raises the order of leap quadrature. All three bound memory by the active-set size and limit gradient chaining to at most one Jacobian factor. Across SD3.5-M, FLUX.1-dev, and FLUX.2-Klein-base on preference, quality, and compositional metrics, the three variants improve over direct-gradient baselines on most metrics.

Modern AI agents rely on elaborate inference harnesses such as Claude Code, Codex, and OpenClaw to drive multi-turn reasoning, tool use, and access to external systems. While powerful, these complex harnesses also make agents hard to train end-to-end with open infrastructure, whose SFT/RL stacks cannot natively express stateful, multi-process harness inference. To address this, we present OpenForgeRL, an open-source framework for training harness-based agents end-to-end in diverse environments. OpenForgeRL achieves this with a lightweight proxy that serves the harness's model calls while recording them as training data for a standard RL codebase (e.g., veRL), and a Kubernetes orchestrator that runs each rollout in its own remote container, together enabling training on any harness in any environment at scale. By decoupling training and inference, OpenForgeRL allows researchers to easily train, study, and improve agents directly in the real harnesses and environments they are deployed with. We validate our framework across diverse, complex harnesses and environments, spanning tool/claw-based agents and multimodal GUI browser- and computer-use agents. Using only hundreds to a few thousand tasks, OpenForgeClaw reaches 31.7 pass^3 and 55.9 pass@3 on ClawEval and 33.7 on QwenClawBench. OpenForgeGUI reaches 37.7 on OSWorld-Verified, 63.0 on Online-Mind2Web, and 72.3 on WebVoyager. Both outperform open baselines of similar size on nearly all benchmarks, and in the GUI setting match or surpass models several times larger. Beyond benchmarks, we analyze how harness choice (e.g., ZeroClaw, OpenClaw, Codex) and RL shape agent behavior. We find that some harnesses are substantially harder to learn than others, and that RL improves agentic reliability, such as self-verification, tool coverage, and completing multi-step plans, though critical abilities such as error recovery remain weak.

Classifier-free guidance (CFG) is a fundamental tool in modern diffusion models for text-guided generation. Although effective, CFG has notable drawbacks. For instance, DDIM with CFG lacks invertibility, complicating image editing; furthermore, high guidance scales, essential for high-quality outputs, frequently result in issues like mode collapse. Contrary to the widespread belief that these are inherent limitations of diffusion models, this paper reveals that the problems actually stem from the off-manifold phenomenon associated with CFG, rather than the diffusion models themselves. More specifically, inspired by the recent advancements of diffusion model-based inverse problem solvers (DIS), we reformulate text-guidance as an inverse problem with a text-conditioned score matching loss, and develop CFG++, a novel approach that tackles the off-manifold challenges inherent in traditional CFG. CFG++ features a surprisingly simple fix to CFG, yet it offers significant improvements, including better sample quality for text-to-image generation, invertibility, smaller guidance scales, reduced mode collapse, etc. Furthermore, CFG++ enables seamless interpolation between unconditional and conditional sampling at lower guidance scales, consistently outperforming traditional CFG at all scales. Experimental results confirm that our method significantly enhances performance in text-to-image generation, DDIM inversion, editing, and solving inverse problems, suggesting a wide-ranging impact and potential applications in various fields that utilize text guidance. Project Page: https://cfgpp-diffusion.github.io/.

The capability of a modern AI agent depends not only on its foundation model but also on its harness, which constructs prompts, manages state, invokes tools, and coordinates execution. As models, APIs, environments, and requirements evolve, the harness must be continually modified. Before such a change can be made, a developer or coding agent must identify all code locations that implement the target behavior. This is difficult because production harnesses are large, tightly coupled, and behaviorally distributed, while modification requests describe what the system should do and repositories are organized by files and modules. Code search, repository indexing, and long-context processing ease inspection, but still leave this behavior-to-code mapping to be recovered by hand. Behavior localization is therefore a central bottleneck in harness evolution. We introduce the Harness Handbook, a behavior-centric representation synthesized automatically from a harness codebase via static analysis and LLM-assisted structuring, linking each behavior to its corresponding source. We also introduce Behavior-Guided Progressive Disclosure (BGPD), which guides agents from high-level behaviors to relevant implementation details and verifies candidate locations against the current source. On diverse modification requests from two open-source harnesses, Handbook-Assisted planning improves behavior localization and edit-plan quality while using fewer planner tokens, with the largest gains on scattered sites, rarely executed paths, and cross-module interactions. Evolving complex agentic systems thus depends not only on generating edits, but also on determining where those edits should be made.

Classifier-free guidance (CFG) is a key technique for improving conditional generation in diffusion models, enabling more accurate control while enhancing sample quality. It is natural to extend this technique to video diffusion, which generates video conditioned on a variable number of context frames, collectively referred to as history. However, we find two key challenges to guiding with variable-length history: architectures that only support fixed-size conditioning, and the empirical observation that CFG-style history dropout performs poorly. To address this, we propose the Diffusion Forcing Transformer (DFoT), a video diffusion architecture and theoretically grounded training objective that jointly enable conditioning on a flexible number of history frames. We then introduce History Guidance, a family of guidance methods uniquely enabled by DFoT. We show that its simplest form, vanilla history guidance, already significantly improves video generation quality and temporal consistency. A more advanced method, history guidance across time and frequency further enhances motion dynamics, enables compositional generalization to out-of-distribution history, and can stably roll out extremely long videos. Website: https://boyuan.space/history-guidance